Delivery Time
5–10 days
Satisfaction Guaranteed
40 Day Return
Secure
Payments

Description

Easy to Print. Flexible with a More Refined Finish.

Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.

Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.

True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.

A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.

From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.

Printing Requirements


LayerHub is now live. A community-built home for filament presets — open to every filament brand, every printer. Every preset comes with a real print photo to prove it.

Print Settings

Nozzle Temperature: 220–240°C
Build Plate Temperature: 35°C
Cooling Fan: 100%
Print Speed: 50–250 mm/s (250 mm/s is the maximum tested speed)
Retraction (Direct Drive): 0.8–1.2 mm
Retraction Speed: 30 mm/s
Chamber / Enclosure: Not required
Drying: 70°C for 6 hours

Polymaker™ TPU95 Matte

£19.99
SKU: PM1023040 HEX Code: #020303
<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>

Key Features

  • True 95A Flexibility
  • Low-Gloss Matte Finish
  • Easy to Print
  • Up to 250 mm/s Tested
Diameter
Weight
Color: Matte Black

Payment Methods

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Easy Printing, Refined Matte Results

Polymaker TPU95 Matte is an easy-to-print, flexible 1.75 mm TPU filament with a matte finish. 

Start with a Standard TPU 95A Profile

Use your slicer’s standard TPU 95A profile as a starting point. Get smooth extrusion and a clean surface with less time spent tuning.

A Matte Finish You Can See and Feel

Give phone cases and other handheld accessories a clean, low-gloss finish with less visible layer lines and a lightly grippy feel.

Print Flexible Parts at Up to 250 mm/s

Designed for smooth extrusion with less stringing and fewer clogs, TPU95 Matte reached 250 mm/s in testing, up to 5× the 50 mm/s TPU 95A benchmark.

Shore 95A Flexibility That Bounces Back

Print parts that bend and rebound, from FPV drone mounts and RC tires to furniture feet and flexible wearables. Shore 95A balances flexibility with the firmness needed for smooth printing and everyday use.

15 Matte Colors, from Classics to Pastels

Choose from nine classic shades and six soft pastels to match your design, whether you’re printing a practical accessory or a playful display piece.

Printer Compatibility and Filament Care

Compatible with most 1.75 mm FDM printers. Use an external spool holder for setups with AMS. Dry the filament before printing and keep it sealed between uses.

See What The Community is Making

Printing Tips

  • Profile: Start with a standard 95A TPU or TPU HF profile. A direct-drive printer is generally easier to set up.
  • Build plate and cooling: Set the bed to 35°C and use 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.
  • Speed: With a 0.4 mm nozzle, use 50–250 mm/s. The upper end is the maximum tested speed. Adjust for your printer and model.
  • Direct-drive retraction: Start with 0.8–1.2 mm at 30 mm/s.
  • Drying and storage: Dry at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box while printing and during storage.
Property X-Y Z Value Method
Densityg/cm³·ISO 1183 — — 1.17 g/cm³ Important ISO 1183
Tensile strengthMPa·ISO 527 — 10.87 MPa Important — ISO 527
Elongation at break%·ISO 527 — 361 % Important — ISO 527
Bending modulusMPa·ISO 178 69.2 MPa Important — — ISO 178
Melting temperature°C·ISO 11357 — — 198.6 °C Important ISO 11357
Glass transition temperature (Tg)°C·ISO 11357 — — -26.6 °C Important ISO 11357

Tested on 100% infill specimens. X-Y = across the layers, Z = between the layers (layer adhesion).

Frequently Asked Questions

Got questions? We've got answers. From choosing the right material to caring for your spools, here's everything you need to know in one spot.

What is Polymaker™ TPU95 Matte?

It is a general-purpose flexible TPU with a Shore hardness of 95A and a low-gloss matte finish. It works well for parts that need to flex and recover their shape, such as protective covers, grips and vibration-damping feet.

Which printer and slicer profile should I start with?

A direct-drive printer is generally easier to set up. Start with a standard 95A TPU or TPU HF profile and tune it for your printer and model.

What nozzle, bed and fan settings should I use?

With a 0.4 mm nozzle, use 220–240°C at the nozzle, 35°C on the build plate and 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.

How fast can I print TPU95 Matte?

The recommended range is 50–250 mm/s with a 0.4 mm nozzle. The upper end is the maximum tested speed. Choose a speed that suits your printer, settings and model geometry.

What retraction settings should I use?

For direct drive, start with a retraction distance of 0.8–1.2 mm at 30 mm/s.

How should I dry and store TPU95 Matte?

Dry the filament at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box to keep it dry while printing and during storage.

Reviews

Polymaker

Polymaker™ TPU95 Matte

£19.99 GBP

Easy to Print. Flexible with a More Refined Finish.

Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.

Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.

True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.

A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.

From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.

Diameter

  • 1.75mm

Weight

  • 1kg

Color

View product
£19.99