5-10 days
Payments
Descripción
Descripción
Lleva tus impresiones al siguiente nivel con Polymaker™ HT-PLA
Diseñado para creadores que exigen rendimiento sin complicaciones. Soporta temperaturas de hasta 150°C y mantiene su forma incluso bajo un calor extremo: sin deformaciones, hundimientos ni concesiones. Más información sobre el producto
Imprime como un sueño
HT-PLA funciona a la perfección en la mayoría de las impresoras FDM con la configuración estándar de PLA, sin necesidad de actualizaciones ni ajustes. Y con velocidades de impresión de hasta 300mm/s, obtendrás resultados de calidad profesional más rápido que nunca.
Sostenibilidad y rendimiento Engineering
Obtén la fiabilidad y sostenibilidad del PLA con la estabilidad térmica de los materiales avanzados. No requiere posprocesamiento: solo imprime y listo.
14 colores intensos y vibrantes
Desde prototipos hasta productos finales, haz realidad tu visión con 14 colores intensos y llamativos que hacen que cada impresión destaque.
¿Necesitas aún más resistencia?
Para obtener un rendimiento mecánico de siguiente nivel, descubre Polymaker HT-PLA-GF —una versión reforzada con fibra de vidrio, diseñada para ofrecer una resistencia excepcional.
Tiempo de ciclo de Gradient:
Arcoíris - 200g
Fuego - 120g
Hielo - 100g
Tropical - 120g
Requisitos de impresión
Ajustes de impresión
Ajustes de impresión
Polymaker™ HT-PLA
Características principales
- Alta resistencia al calor
- Impresión de alta velocidad
- Fácil de imprimir
- No se requiere post-procesamiento
Polymaker™ HT-PLA - Negro / 1kg está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
Tipos de impresión
- Utiliza una cubierta, evita las corrientes de aire y mantén la temperatura recomendada de la cama para reducir la deformación y la separación de capas.
- Recuece durante 30 minutos a 80 °C - 100 °C (se recomiendan 100 °C) cuando se requiera una mayor estabilidad térmica.
- Comienza dentro de los rangos recomendados de 210 - 230 °C para la boquilla y de 25 - 60 °C para la cama, y luego realiza pequeños ajustes según la impresora y el modelo.
- Utiliza el ajuste recomendado de ventilador de refrigeración ENCENDIDO y mantén la velocidad de impresión dentro de Hasta 300 mm/s.
| Property | X-Y | Z | Value | Method |
|---|---|---|---|---|
| Density | — | — | 1.287 g/cm³ Important | ISO 1183 |
| Tensile strength | 42.86 MPa Important | 20.83 MPa Important | — | ISO 527 |
| Elongation at break | 2.8 % Important | 0.97 % Important | — | ISO 527 |
| Bending strength | 74.04 MPa Important | 29.39 MPa Important | — | ISO 178 |
| Bending modulus | 2893.46 MPa Important | — | — | ISO 178 |
| Young's modulus | 2945.75 MPa Important | 2596.43 MPa Important | — | ISO 527 |
| Charpy, unnotched | 21.49 KJ/m² Important | — | — | ISO 179 |
| Charpy, notched | 4.67 KJ/m² Important | — | — | ISO 179 |
| Melting temperature | — | — | 177.23 °C Important | ISO 11357 |
| Glass transition temperature (Tg) | — | — | 59.8 °C Important | ISO 11357 |
| Vicat softening temperature | — | — | 156.2 °C Important | ISO 306 |
| HDT (1.8 MPa) | — | — | 58.6 °C Important | ISO 75 |
Probado en muestras con un 100 % de relleno. X-Y = transversal a las capas, Z = entre las capas (adhesión entre capas).
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
¿Puedes anular Polymaker™ HT-PLA¿S ?
¿Qué es la estabilidad térmica?
son Polymaker™ HT-PLA¿Higroscópico de la vida?
son Polymaker™ HT-PLA¿Es resistente a la UV/Tempo?
¿Cuál es la tasa de reducción?
son Polymaker™ HT-PLA¿La lavandería es segura? (Seguridad de los alimentos, vapor de agua)
Se puede imprimir con PLA Ajustes?
son Polymaker™ HT-PLA¿Es abrasivo?
Puedes imprimir Polymaker™ HT-PLAy con un menor Boquilla?
Qué es el más alto Velocidad ¿Puedes imprimir?
¿Todos los colores tienen lo mismo? Resistencia al calor?
¿Es biodegradable?
¿Qué es el HT-PLA?
¿Es fuerte?
¿Tiene humo durante la impresión?
Podríamos anexar el HT-PLA ¿En agua cocida?
¿Es esto PLA ¿También basado en NatureWorks?
¿Qué HT-PLA Tienen similar Resistencia química como regular PLA?
¿Cuál es el porcentaje de fibra de vidrio (GF) en el HT-PLA¿La composición de GF?
¿Por qué escogemos no poner el contenido de fibra % en el nombre similar a Fiberon?
CoPE podría funcionar así como un apoyo Material?
en el horno después de Recocido?
Revisión
Customers praised this heat-resistant filament for printing "like a dream" with "barely any layer lines" and smooth finishes. Most found it as easy to print as regular PLA while offering superior heat tolerance for outdoor/automotive applications. Some reported layer adhesion issues under heat, warping concerns, and color inconsistencies (yellows appearing dull/greenish).
Excellent product, holds up well to the summer heat inside of a vehicle
prints as easy as PLA, but significantly better heat resistance. It has a really nice matte finish. I’ve used it for functional parts that are exposed to pretty hot temperatures inside our motorhome and they’ve held up very well.
great filament and doesn’t seem to cause any issues on my a1 mini!
It prints beautifully but failed in a hot car in less than an hour while the identical model in PETG didn't deform at all. I'm terribly disappointed in it.
Edited to add: per Polymaker's suggestion I repeated the print and annealed it at 100C for 30 minutes before testing it again. This time it performed the same as the PETG. The second photo shows the same model/same setting in PETG (far), HT PLA (middle) and annealed HT PLA (closest). I'm satisfied now, as the extra annealing step really isn't that big of a deal.
We are very sorry about this experience! HT-PLA will have heat stability under it's own weight up to 150C with no annealing required. But if the part is under weight/stress - it can deform closer to the 60C mark. Annealing can improve this but will only bring it to around PETG levels.
But unfortunately under weight like from this candle - I assume HT-PLA might not be the best bet. But we always stand behind our products so please reach out to the email listed on the spool with your order info and a photo of the spool where the batch number is located and we can certainly help further!
Prints great and looks great!! Used the blue it for my first nerf blaster!
Excellent quality
I printed a rather thin part and heated it to 65c, after an hour of this the parts snapped very easily along the layer lines. I will update if need be as I continue to print with it, but right now it is not what I was anticipating.
I'm using this for RC models and it's fantastic! Prints easily, barely any layer lines and so smooth. Performance matches appearance. I have ordered more for body parts as well.
Prints like a dream! I normally use PETG for outdoor/heat resistant projects but don't care for the print quality/shine of PETG. Love how PLA prints but ofcourse it won't survive the heat. Gave this HTPLA a try and so far so good. My only complaint is that the yellow is rather dull and almost has a light greenish hue to it, it's not as vibrant as I had hoped for coming from Polymaker.
Prints easier than PETG, ASA, PC, or ABS just as strong, with a comparable heat tolerance.
The color is rich and vibrant — a beautiful, true teal that looks great on finished prints. It feeds smoothly, layers cleanly, and I had zero stringing or clogging issues. The added heat resistance compared to standard PLA is a real bonus for functional parts. Highly recommend to anyone looking for a reliable, gorgeous filament!
Tangles on the roll, poor adhesion and warping using the recommended settings. Does not print just like pla.
Hey Ash!
We are sorry you are having a negative experience with our HT-PLA! We use auto winding without human interference so tangling should not be possible but we will still always stand behind our products and replace if this occurs. Please reach out to support@Polymaker.com with your order information and a photo of the spool where the batch number sticker is located.
Our HT-PLA should also print just like PLA without warping or having worse layer adhesion than standard PLA so that is odd! We can not only help to replace but also help to troubleshoot here.
HT-PLA is great.
The filament was very good. It printed smoothly and didn’t require very much change to the printing set up I had for regular PLA.
Extremely clean prints with great temperature stability.
Bought 5kg of red for a project and really wanted to make sure that it was gonna be heat resistant. the color is vibrant and print quality it perfect for parts that need to be interlocked and assembled. Will have to post a picture once the project is done.
Printing with Polymaker HT-PLA is a great experience! I need to print a project where a higher temp tolerance was a must but I wanted the ease of printing with PLA. HT-PLA was the perfect match and my prints came out great.
Looks great.
Best quality printing of any PLA that I have used no layer
Lines visible. Only filament I have found that is better is PLA-cf. but very limited color selection. I usually wait till it’s on sale for under $20 to purchase
Can the ht-pla be used in the Bambu AMS without respooling it?
Yup! All of our spools have hardened edges to spin great in AMS like systems!
