5–10 días
seguros
Descripción
Descripción
Diseñadores de impresión:
Anton
Rexi Labs
Segway Bro
Michael Winston
Szeez
JP-3D-Prints
Mattew Ghost
Epiq3D
Hodzinets
Trent Studio
Requisitos de impresión
Ajustes de impresión
Ajustes de impresión
Polymaker™ PLA Pro
Características principales
- Impresión de alta velocidad
- duradero y duradero
- Fuerte adhesión entre capas
- Fácil de imprimir
- amplios Color Selección
Polymaker™ PLA Pro - Negro / 1kg está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
Tipos de impresión
- Comienza dentro de los rangos recomendados de 210 - 230 °C para la boquilla y 30 - 60 °C para la cama, luego haz pequeños ajustes según la impresora y el modelo.
- Usa el ajuste recomendado de ventilación ON y mantén la velocidad de impresión dentro de Hasta 300 mm/s.
- Realiza una pequeña impresión de prueba antes de un trabajo largo y ajusta solo dentro del intervalo de impresión publicado.
- Mantén despejada la trayectoria del filamento y confirma que la alimentación desde la bobina sea fluida antes de comenzar una impresión larga.
| Propiedad | X-Y | Z | Valor | Método |
|---|---|---|---|---|
| Densidad | — | — | 1.237 g/cm³ Importante | ISO 1183 |
| Resistencia a la tracción | 39.93 MPa Importante | 25.39 MPa Importante | — | ISO 527 |
| Alargamiento a la rotura | 16.57 % Importante | 3.05 % Importante | — | ISO 527 |
| Resistencia a la flexión | 62.12 MPa Importante | 49.96 MPa Importante | — | ISO 178 |
| Módulo de flexión | 2438.41 MPa Importante | 2368.62 MPa Importante | — | ISO 178 |
| Módulo de Young | 2531.08 MPa Importante | 2265.58 MPa Importante | — | ISO 527 |
| Resistencia al impacto Charpy, sin entalla | 51.7 KJ/m² Importante | 21.7 KJ/m² Importante | — | ISO 179 |
| Resistencia al impacto Charpy, con entalla | 20.76 KJ/m² Importante | — | — | ISO 179 |
| Temperatura de fusión | — | — | 158.9 °C Importante | ISO 11357 |
| Temperatura de transición vítrea (Tg) | — | — | 58.3 °C Importante | ISO 11357 |
| Temperatura de reblandecimiento Vicat | — | — | 63.5 °C Importante | ISO 306 |
| HDT (0.45 MPa) | — | — | 58.1 °C Importante | ISO 75 |
| HDT (1.8 MPa) | — | — | 55.6 °C Importante | ISO 75 |
Probado en muestras con un 100 % de relleno. X-Y = transversal a las capas, Z = entre las capas (adhesión entre capas).
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
¿Cuál es la diferencia entre PolySonic™ PLA Pro y Polymaker™ PLA Pro?
¿Será que los espoles trabajarán en un AMS?
¿Es esto Material ¿El alimento seguro?
¿Vendéis los recortes?
¿Es esto Material ¿Es reciclable?
¿Necesito una Cámara cerrada para imprimir PLA ¿El Pro?
Y lo hace PLA Pro requiere un duro Boquilla?
Y es PLA Pro más fuerte que regular PLA?
Cómo debe PLA ¿Se almacenan los Pro?
Cuáles son los materiales de apoyo que trabajan con PLA ¿El Pro?
Revisión
High-quality 3D printing filament praised for exceptional print quality and strength. Customers said it "prints flawlessly" with "smooth" results and "fantastic" layer adhesion. Works well at high speeds. Notable for rich colors and consistency. Some concerns about new formula performance and packaging changes (zip bag replaced with heat-sealed bag). One delivery issue reported.
While I'm still all about that PolyLite PLA Pro, I have zero regrets getting this metallic dark blue in the new formula.
Because this is a more aesthetic color, I end up using it for more aesthetic prints and the differences between the old / new formulas don't matter as much. The color has been popular among customers, so it's not one of those spools that's going to sit on a shelf for a long time. It's getting used.
Prints great. Works great in my Qidi Q2
Great saturation and vary smooth print
This filament has been THE backbone of all of my print since I started. Holds in humidity decently, has smooth prints and not many failures, and overall easy to print with! Would recommend.
Somehow having a better experience than my Polymaker ASA. Easier to print, sticks to bed without glue and at a lower temp, similar or higher impact resistance? Besides HDT, what is not to love? Very happy overall with all my Polymaker experiences, seriously.
exactly what I needed, ordered 3 more kgs.
Absolute top tier quality. Downloaded. A profile online and it was flawless from the first print.
So far my printing experience with this new PLA Pro formula has been mixed. I have only had 2 serious jams with my setup, and this product is responsible for 1 of them on the first spool I printed of it. Additionally, the functional specs that matter are almost unanimously worse than the old formula. -1 star for being a jam suspect, -1 star for being less functional than the old formula. 3 stars.
Polymaker PLA Pro black prints smooth and clean! Polymaker has the colors I need in stock, and ships pretty quick and for free.
Perfect Prints, good Layer adhesion
Really smooth printing and very sturdy.
good material
Very smooth prints. Just make sure to run the generic PLA settings on your Bambu printer or you might get jams. Otherwise, the prints are very strong and they look perfect.
Perfect filament for my military prints.
I had a serious stringing problem with another brand. I switched to a Polymaker PLA Pro mid-way during the print and the stringing problem disappeared.
Polymaker does it again. Their products are consistent in quality and have yet to give me issues. Quick shipping and overall great service.
Easy printing. Just the right balance of strength and flexibility when printing mechanical parts. I can't wait until they get this packaged for refills.
Used a free coupon from a raffle and there were no issues. The pla I received prints very well and I love the color.
Shipping was quick and the Polymaker PLA Pro filament printed great and was exactly what I needed as far as strength and print quality is concerned. Will buy again!
Works better than the rest. This might not be the cheapest, but you’re paying for quality. This is probably the best filament on the market.
After drying with Polydryer for just an hour, this filament is doing a great job and print right. Can't find major defect on calibration print. The only defect is the "eco friendly spool" which requires an adapter in order to use in Bambu AMS. Also the filament starts to tangle a bit after a few prints.
Does Polymaker Pro Metallic contain mica or any other metal and does it require a hardened nozzle?
Metallic PLA uses a special glitter powder for the metallic effect, and it contains a very fine powder that is not abrasive.
Hi
I would like to know if I can place orders using HEX or RGB color code? (Custom) or
Do you have a catalog with the colors and codes?
Could I get better price(wholesale) if I’m living in Houston?
Hey!
You can find the closest matches for your HEX or RGB Color Code using our color matching tool: https://app.polymaker.com/
You can then order wholesale here! https://us-wholesale.polymaker.com/
