5-10 days
Payments
Descripción
Descripción
Polymaker™ ASA: rendimiento resistente a los rayos UV y preparado para exteriores
Resistencia superior a las condiciones climáticas y a los rayos UV
Polymaker™ ASA está diseñado como una alternativa avanzada al ABS, ya que ofrece una mayor resistencia a las condiciones climáticas y una excelente estabilidad frente a los rayos UV. Esto lo convierte en el filamento ideal para aplicaciones en exteriores donde la exposición a la luz solar y a los elementos es un factor importante.
Propiedades mecánicas robustas
Con una resistencia mecánica y durabilidad comparables a las del ABS, Polymaker™ ASA ofrece un rendimiento fiable para piezas funcionales, carcasas y prototipos que deben soportar condiciones reales.
Fácil transición desde ABS
Polymaker™ ASA se imprime con configuraciones muy similares a las del ABS, lo que facilita el cambio a los usuarios familiarizados con la impresión en ABS. Solo tienes que utilizar una impresora 3D cerrada para garantizar un control óptimo de la temperatura y minimizar la deformación.
Perfecto para piezas funcionales y de exterior
Elige Polymaker™ ASA para cualquier proyecto que requiera resistencia a los rayos UV, durabilidad frente a las condiciones climáticas y sólidas propiedades mecánicas: es perfecto para uso en exteriores y resultados duraderos.
Nota: PolyLite ASA ahora es Polymaker ASA. Es posible que aún recibas el embalaje antiguo mientras realizamos la transición.
Requisitos de impresión
Ajustes de impresión
Ajustes de impresión
Polymaker™ ASA
- UV Resistant
- Heat Resistant
- Strong & Durable
- Chemical Resistant
- Post-Processing
Polymaker™ ASA - Negro / 1kg está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
- Secado: ASA absorbe poca humedad. Si el filamento solo ha estado expuesto brevemente en condiciones normales, normalmente basta con secarlo a 70 °C durante 4 horas. Utiliza el ajuste recomendado en la ficha técnica (TDS) de 70 °C durante 7 horas tras una exposición prolongada o cuando aparezcan defectos de impresión relacionados con la humedad.
- Placa de impresión: Aplica un adhesivo adecuado como capa de separación y deja que la placa de impresión se enfríe antes de retirar la impresión.
- Temperatura y Velocidad: Utiliza una temperatura de boquilla de 230-260 °C, una temperatura de cama de 75-95 °C y una Velocidad de impresión de 50-200 mm/s. Para imprimir más rápido o mejorar la Adhesión entre capas, utiliza 240-260 °C.
- Deformación y Adhesión entre capas: Utiliza una carcasa, evita las corrientes de aire y mantén apagado el ventilador de refrigeración. Imprime en un área bien ventilada.
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
What is the difference between ASA and ABS?
Do you have test results for UV resistance with ASA?
Can Polymaker™ ASA be post-processed with Acetone?
Will the spools work in an AMS?
Is this material food safe?
Do you sell refills?
Customers praised this ASA filament for exceptional print quality, describing it as "top notch" with excellent repeatability and minimal warping. Many noted it "prints flawlessly" and is easier than PETG. Shoppers highlighted outstanding outdoor durability, UV resistance, and vibrant colors. Some mentioned minor warping with Pop Green and occasional filament tangling.
A very good filament and easy to dial in prints. Achieved best results with a heated chamber to 60 C.
3kg spool of blue ASA.
This 3kg spool has been fantastic for printing. After some initial drying, the material has performed wonderfully with no clogs or other issues. The ASA sands and vapor smooths very well, with a really pleasing look afterwards.
I've been using Polymaker ASA to make a variety of auto interior and exterior pieces and the quality and repeatability of the filament is top notch.
Great product for printing large large free prints on Bambu P1S's. I reguarly print 250mm large options over 12h and this ASA is faultless, thankyou!
Always an easy print with Polymaker ASA. Lays down smooth. Prefer to print with this over PETG.
Love the color and material, 100% recommend
Highly recommend this ASA. Super durable and virtually weatherproof in static strength applications. Awesome colors too.
So far this is working very well. I tried some other ASA from Elegoo and it wouldn’t print right no matter what I tried and this has completely flipped my bad experience on its head. I read a bunch of other reviews and people only had good things to say about Polymaker so I’ve officially found my new filament source!
I've finally found a red that suits my wants. I've bought countless spools of red filament in various materials but the color has never been a deep red. This all changed with this ASA, it's for me the best red on the market as far as I know. Also it's super easy to print ! I had always been used to only printing PLA and PETG, and found ASA to be easier to print than PETG (given you have an enclosure of course).
Ordered in July and received today, July 18. Very well packaged with internal protection and vacuum-sealed film. Can't wait to start printing with this filament.
PLA Pro and ASA are our go-to filaments. Prints well. Love that it comes with profiles.
This is great ASA, prints extremely well, warps less than other ASA's I've used and the colors are perfect. Will be buying more in the future.
I only print ASA and your natural is the best I've ever used!
This ASA prints just as well as any PETG or PLA that I have tried. This is quickly becoming the default filament for me for anything that needs durability.
This asa filament printed perfectly and I have had 0 issues so far on my bambulab x2d.
Perfect for outdoor products
I was a bit terrified of using ASA filament for the first time, but I’m through 2 rolls of polymaker now and overall the experience was quite enjoyable. I had pretty good bed adhesion- using mouse ears on sharp corners with a 0mm gap. Easy to clean up post print. Very happy with the results.
When I first built a Voron r2, I had the parts printed in gray and yellow polymaker ABS, so when I printed spares, the yellow ABS did not match my printer. After a bit of messing around, it turned out the printer used ASA Yellow. I've been hooked on ASA yellow ever since!
I recently switched my PLA filaments supplier to Polymaker due to stringing issues I had with that supplier. I was very please with the result and I decided to try the ASA from Polymaker against the other supplier. Well, also here I am impressed. No more testing: Polymaker is now my go-to filaments supplier.
Bought the ASA pop green and it looks amazing! It printed cleaner with smoother layer lines than some of my PETG. Very impressed!
Used other ASA… keep coming back to Polymaker. The consistency and reliability is astounding.
