5–10 días
seguros
Descripción
Descripción
Diseñado para un rendimiento excepcional
Polymaker™ HT-PLA-GF combina estabilidad a altas temperaturas con mayor resistencia y durabilidad. Soporta hasta 150°C sin combarse ni perder su forma. Cuando se recuece, puede ser perfecto para piezas funcionales que deben soportar el calor. Más información sobre el producto
Impresión sencilla, potencia extra
Imprime perfectamente con los ajustes estándar de PLA y admite velocidades de hasta 350mm/s. Solo tienes que cargarlo y empezar: no requiere ajustes especializados.
Reforzado con fibra de vidrio
Más resistente. Más fuerte. Más inteligente. HT-PLA-GF está reforzado con fibra de vidrio, lo que proporciona mayor rigidez y durabilidad para aplicaciones exigentes.
Nota: Este material es abrasivo; utiliza una boquilla de acero endurecido o de rubí para obtener los mejores resultados.
¿Necesitas una mayor deflexión térmica?
Recuece a 80–100°C durante 30 minutos (recomendamos 100°C) para obtener un HDT aún mayor.
9 colores llamativos
Disponible en 9 tonos llamativos, HT-PLA-GF aporta una gran resistencia y estilo a tus impresiones.
¿Buscas más opciones de color? Echa un vistazo a Polymaker HT-PLA
Requisitos de impresión
LayerHub Ahora está vivo. Una casa construida por la comunidad para los presetos de filamento — abierto a cada filamento Marca, cada impresora. Cada preseta viene con una foto de impresión real para demostrarlo.
Ajustes de impresión
Ajustes de impresión
Polymaker™ HT-PLA-GF
Características principales
- Alta resistencia al calor
- Impresión de alta velocidad
- Reforzado con fibra de vidrio
- Fácil de imprimir
Polymaker™ HT-PLA-GF - Power Tool Red / 1kg está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
Tipos de impresión
- Utilice una boquilla endurecida, ya que la formulación con relleno o partículas puede desgastar las boquillas de latón.
- Recocer durante 30 minutos a 80°C - 100°C (se recomienda 100°C) cuando se requiera una mayor estabilidad térmica.
- Comience dentro de los rangos recomendados de 210 - 230°C para la boquilla y de 25 - 60°C para la cama, y luego realice pequeños ajustes según la impresora y el modelo.
- Utilice el ajuste recomendado de ventilador de refrigeración ACTIVADO y mantenga la velocidad de impresión dentro de Hasta 350 mm/s.
| Propiedad | X-Y | Z | Valor | Método |
|---|---|---|---|---|
| Densidad | — | — | 1.337 g/cm³ Importante | ISO 1183 |
| Resistencia a la tracción | 50.09 MPa Importante | 23.68 MPa Importante | — | ISO 527 |
| Alargamiento a la rotura | 2.77 % Importante | 0.85 % Importante | — | ISO 527 |
| Resistencia a la flexión | 86.41 MPa Importante | 29.21 MPa Importante | — | ISO 178 |
| Módulo de flexión | 3684.87 MPa Importante | — | — | ISO 178 |
| Módulo de Young | 3793.85 MPa Importante | 3018.1 MPa Importante | — | ISO 527 |
| Resistencia al impacto Charpy, sin entalla | 22.99 KJ/m² Importante | — | — | ISO 179 |
| Resistencia al impacto Charpy, con entalla | 4.92 KJ/m² Importante | — | — | ISO 179 |
| Temperatura de fusión | — | — | 174.87 °C Importante | ISO 11357 |
| Temperatura de transición vítrea (Tg) | — | — | 59.76 °C Importante | ISO 11357 |
| Temperatura de reblandecimiento Vicat | — | — | 148.9 °C Importante | ISO 306 |
| HDT (0.45 MPa) | — | — | 75.5 °C Importante | ISO 75 |
| HDT (1.8 MPa) | — | — | 59.7 °C Importante | ISO 75 |
Probado en muestras con un 100 % de relleno. X-Y = transversal a las capas, Z = entre las capas (adhesión entre capas).
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
¿Puedes anular Polymaker™ HT-PLA¿S ?
¿Qué es la estabilidad térmica?
son Polymaker™ HT-PLA¿Higroscópico de la vida?
son Polymaker™ HT-PLA¿Es resistente a la UV/Tempo?
¿Cuál es la tasa de reducción?
son Polymaker™ HT-PLA¿La lavandería es segura? (Seguridad de los alimentos, vapor de agua)
Se puede imprimir con PLA Ajustes?
son Polymaker™ HT-PLA¿Es abrasivo?
Puedes imprimir Polymaker™ HT-PLAy con un menor Boquilla?
Qué es el más alto Velocidad ¿Puedes imprimir?
¿Todos los colores tienen lo mismo? Resistencia al calor?
¿Es biodegradable?
¿Qué hay en HT-PLA?
¿Es fuerte?
¿Tiene humo durante la impresión?
¿Puedo anular HT-PLA en agua caliente?
¿Es esto PLA ¿También basado en NatureWorks?
¿Hay HT-PLA semejantes Resistencia química como regular PLA?
¿Qué porcentaje de fibra de vidrio (GF) está en la composición HT-PLA-GF?
¿Por qué escogemos no poner el contenido de fibra % en el nombre similar a Fiberon?
CoPE podría funcionar así como un apoyo Material?
en el horno después de Recocido?
Revisión
Customers praised this glass-fiber reinforced filament for exceptional heat resistance and ease of printing. "Easy to print and super strong," with a textured matte finish that minimizes layer lines. Most found it prints like regular PLA with superior dimensional stability. Some noted brittleness issues and difficult support removal, requiring hardened nozzles.
This is an amazing filament. Perfect for everyday functional prints. If you want a natural non-smooth finish that shows minimal layer lines then look no farther.
prints as easy as PLA, but significantly better heat resistance, and the GF versions have a really nice textured finish that obscures the layer lines nicely.
I’ve used it for functional parts that are exposed to pretty hot temperatures inside our motorhome and they’ve held up very well.
I am in love! This filament is amazing to work with and definitely adds the next level I needed to do some work with PLA. I had some brand specific projects I wanted to do and wanted the colors to match. It was great to see them come to life.
HT-PLA-GF Grey printed on X1C using default PLC-CF profile, 230 C temp. Printed without any issue. Most importantly the supports came off very easily and cleanly. By far that is my favorite property of PLC-CF now GF. I hope they stock them as refills so they'll run better in an AMS.
Excellent heat resistance. Gives an amazing finish for walls. Just wipe down any parts you make with this to break off any glass fibers that are protruding.
Easiest fiber reinforced filament I have ever used. Easiest high temp filament I have used. Printing functional power tool parts for outdoor use.
Great to work with
Polymaker is my go-to source for filament, with an amazing color palette and an unbeatable, strong, tough series. I haven’t tried HT-PL-GF yet, but from the reviews I’ve read, everyone praises its strength and ease of printing.
EXCELLENT filament! I own mainly Milwaukee tools, and these new filaments are perfect! I have even turned some friends (they are all Makita) to your new colors!
Perfect for this project (PLA Filament Spool). It is a little finicky to print. Very Hard but also brittle. It broke in the PTFE tube once. High temperature characteristics were spot on, just as described. It has a very interesting texture. It feels nice to the touch, but the extruder had some trouble grabbing it.
I purchased this to print a battery holder for a friend and it worked flawlessly.
This is absolutely my favorite PLA to use!! Will continue using it unless an even better material comes out!
I love this filament. I designed and printed a phone holder for my car. The glass fibers make it look incredible. I've annealed the print, I've had no issues with softening in the car on a hot day. Also, it's about the only PLA I have that I don't have warping issues with, it's super stable and dimensionally accurate. It's my new favorite filament. Make sure you use a hardened nozzle with it.
I was very impressed with the PolyMaker HT-PLA-GF. I printed using .4 hardened nozzle with my Qidi Plus 4 with typical speeds used for PLA with additive in it. I push temps up to the 230C-234C, which for speed I run works out perfect in my experience after thousands of hours perfecting my Plus4 tuning. I then decided to anneal this filament to see full benefits. This was a very easy process and the results were very noticeable. Two parts of item I made when banged together rung out like solid wood.
I was very happy with my final results, will keep this material on hand for other unique projects that require the amazing tensile strength of PLA mixed with the high temp resistance found with Poly Maker HTPLA-GF. Do anneal your prints, this can very easily be done direct on your build plate if your part is not too thick. The result of annealing was impressive. Thank you PolyMaker for such a wonderful product. I will be purchasing your HT line more often going forward.
I would love to see PCTG from PolyMaker?
Good filament but does not work for structural parts in the heat. Annealing helps but I can achieve better results with GF ASA with no post processing
This is definitely my favorite PLA. It can withstand high heat temperatures. I already have stuff 3-D printed and put on my boat and it’s doing great. I love the texture of the Glassfield PLA it prints great if I had to give it a couple cons, it is stringy, but that can be fixed with just a little bit heat heat and I also printed at 250° C because I tried to get the best of layer adhesion and that’s the only other con. But it prints so beautifully
It prints like a dream, has the finish texture that you love of fiber filaments and won't turn into a puddle when accidentally left in your car! The support removal is impressive as well, it really does release from itself as a support material quite nice.
I live in Florida, so gear has to hold up to not only the 90+f temps and high humidity, it has to survive inside 110+f vehicle interiors. It's nice to be able to print something quick and easy that will survive those conditions. It's a nice, simple alternative to ABS or PA for some applications, without the need for a lot of dryer time, or annealing. Just print and go.
Also very impressed with the quality of the print without any tweaking, just used Polylite presets in Bambu Studio and it worked a treat.
This PLA is tough, very stiff, and stood up to being left in a hot car
Nice texture and amazing temperature resistance!
