5–10 giorni
Pagamenti
Descrizione
Descrizione
Classe professionale ABS
Polymaker™ ABS Pro è un filamento di grado engineering ABS sviluppato per gli utenti che richiedono prestazioni superiori a quelle che può fornire lo standard ABS. Con una maggiore resistenza al calore, resistenza e resistenza all'impatto, ABS Pro è l'aggiornamento ideale per applicazioni di stampa funzionale impegnative.
Impresabilità ad alta velocità
Validato per velocità di stampa fino a 250 mm/s, ABS Pro consente un aumento della produttività mantenendo un'eccellente qualità e affidabilità delle parti. Ottimizzato per ambienti di stampa chiusi, fornisce risultati rapidi e coerenti.
Performance ad alta temperatura
Con una temperatura di deflezione del calore (HDT) di 101.4°C a 1.8 MPa e 106.4°C a 0.45 MPa, ABS Pro mantiene la stabilità dimensionale in ambienti ad alte temperature. È molto adatto per i prototipi funzionali, le chiusure per uso finale, le supporte, i clip, i jig e i componenti personalizzati della stampante in cui la norma ABS può non funzionare.
Costruito per durare
ABS Pro combina alta resistenza, rigidità e resistenza all'impatto per applicazioni funzionali esigenti. Con una resistenza alla trazione di 34.94 MPa, una resistenza alla flessione di 60.05 MPa e una resistenza all'impatto di 30.48 kJ/m², ABS Pro fornisce la durata, la rigidità e la resistenza richieste per le parti portanti e funzionali..
Affidabile sotto carico
L'aumento della resistenza all'arresto aiuta ABS Pro a resistere alla graduale deformazione sotto tensione meccanica sostenuta, fornendo prestazioni affidabili a lungo termine in applicazioni strutturali e meccanicamente impegnative.
14 Opzioni di colore vibrante
Disponibile in Regular, Gradient, Galaxy, e altro ancora, ABS Pro combina prestazioni di livello professionale engineering con una versatile selezione di opzioni estetiche senza compromessi.
Requisiti di stampa
LayerHub E' ora in diretta. Una casa costruita dalla comunità per i preimpostamenti del filamento — aperta a tutti i marchi di filamenti, a tutte le stampanti. Ogni preimpostamento viene fornito con una vera foto stampata per dimostrarlo.
Imprinta impostazioni
Imprinta impostazioni
Polymaker™ ABS Pro
Polymaker™ ABS Pro - Galaxy Grigio scuro / 1kg ...è stato ordinato al fornitore e verrà spedito non appena sarà di nuovo disponibile.
Specificità tecniche
Tutto quello di cui hai bisogno prima di stampare
| Proprietà | X-Y | Z | Valore | Metodo |
|---|---|---|---|---|
| Densità | — | — | 1.04 g/cm³ Importanti | ISO 1183 |
| Resistenza della tensione | 34.94 MPa Importanti | 21.87 MPa Importanti | — | ISO 527 |
| allungamento al momento della pausa | 7.34 % Importanti | 1.54 % Importanti | — | ISO 527 |
| Forza di piegatura | 60.05 MPa Importanti | 41.24 MPa Importanti | — | ISO 178 |
| Modulo di piegatura | 2330 GPa Importanti | 2170 GPa Importanti | — | ISO 178 |
| Modulo di Young | 2330 GPa Importanti | 1950 GPa Importanti | — | ISO 527 |
| Charpy, non incatenato | 30.48 KJ/m² Importanti | 6.13 KJ/m² Importanti | — | ISO 179 |
| Carpi, incisivi | 14.48 KJ/m² Importanti | — | — | ISO 179 |
| Temperatura di transizione del vetro (Tg) | — | — | 114.9 °C Importanti | ISO 11357 |
| Temperatura di ammorbidimento | — | — | 116.1 °C Importanti | ISO 306 |
| HDT (0.45 MPa) | — | — | 106.4 °C Importanti | ISO 75 |
| HDT (1.8 MPa) | — | — | 101.4 °C Importanti | ISO 75 |
Testato su esemplari 100% infill. X-Y = attraverso gli strati, Z = tra gli strati (adesione dello strato).
Domande frequenti
Ha delle domande? Abbiamo risposte. Dalla scelta del materiale giusto alla cura delle cuciture, ecco tutto quello che devi sapere in un unico posto.
Ho bisogno di un involucro per stampare ABS Pro?
È vero? ABS I professionisti richiedono un fumo indurito?
Devo asciugarmi ? ABS Pro prima di stampare?
Le bobine funzionano con AMS?
Con quali stampanti è compatibile ABS Pro?
Qual è la differenza tra ABS Pro e ABS Max?
ABS Pro è più forte del standard ABS?
Questo materiale è idoneo al contatto con gli alimenti?
Come dovrebbe essere conservato ABS Pro?
Recensioni
Customers praised this ABS filament for exceptional print quality and fast delivery. Many noted "some of the best ABS" they've used with minimal warping. However, some experienced inconsistent results with bed adhesion and dimensional stability. Color accuracy concerns were raised, with thumbnails not matching actual products. Works best with heated chambers and higher temps.
Really easy to print with, plate bonding has been good, as well as dimensional stability on small parts material is strong. Colour works well and matches in with the prusa parts I am re-printing. Works well in the prusa core one and top surface is very clean, but could be the diamond back nozzle. Will definitely be getting more in the future for other projects.
Polymaker filaments are some of the best filaments I have used. Never had any problems with them. Clean prints everytime.
The Voron Red ABS Pro is Great.
Fast Shipping. Printing beautifully.
The person in charge of the thumbnails is colorblind. Not sure how else this sort of thing could happen. The Voron Red thumbnail is quite crimson, but the preview photo shows the proper color. Of course the way the website is set up on mobile, you can't always see the preview photo (or sometimes there isn't one) when you select the tile to add to cart. I'm happy to support the Voron project, but I was expecting it to be a darker red color to match the color of the parts on my printer.
I am still excited to use this filament, but I can't use it for what I planned for.
Polymaker, please buy whoever is in charge of the thumbnails a pair of thise colorblind correction glasses!
I bought the ABS Pro in Polymaker teal. I went by stock images and the hex code. The product in hand is not even close to what is displayed on the product page or any site depicting images by HEX. #1FBEC7 is a much stronger indicator of the tangible product.
I can't speak to the filament properties as I haven't printed with it and am not sure I even will because the color is so off. I would try and return if I could do that, but since the vacuum seal is opaque, I had to destroy the packaging to even see the color. Enough to put me off from buying other colors.
Very sorry for any issues with our HEX code being misleading - I do seem to agree this is a bit off. I am going to have the team investigate - in the meantime can you reach out to us via the email listed on the spool? We can help further there.
This is some of the best feeling that I have ever used the Galaxy ABS Pro and regular ABS Pro I've never had trouble with warping with the bed at 110 and nozzle at 175 I do really hope they do more colors in Galaxy ABS Pro
Some of the best abs I used and very quick delivery
Some of the best abs I used and very quick delivery
I am the first to admit I will grab cheaper ABS solutions, but for printing parts for showcase printer builds I go for the best. Was excited to try out the new Polymaker ABS Pro for acccent parts in a new Voron 2.4 build and the ABS Pro printed flawlessly with minimal tuning on my Trident printer. Great solid white color. Thanks Polymaker! Great Stuff!
Was really looking forward to this as a replacement to Siraya Techs HT HF ABS, unfortunately while there are some things it does better mainly in benchmarks actual printing experience is rather poor.
The Good
- Crazy good volumetric speed: I could hit 40mm^3 on occasion with no defects, and reliably all the time at 35mm^3
- Heat resistance: this benchmarks well comparable to Siraya tech
- Color Availability: Plenty of colors available as opposed to just black
The Bad
- Extremely difficult to print: 50% of the time loses bed adhesion after the first 5 layers or 3/4 of the way through a print.
- Dimensional Stability: This is easily the worst filament I've ever used when it comes to retaining shape, consistent sizing per print, and shrinking/warping during printing
-Surface Quality: No matter how dialed in the calibrations got and going from peak speed to half of the theoretical max layer adhesion is poor, no flow rate results in a smooth finish it either underextrudes, or overextrudes to the point of looking fuzzy, blobbing, etc
-Overall more demanding temps: Temps need to be roughly 20 degrees hotter on the nozzle and 15 degrees hotter on the print bed in order to have any chance of completing a print without losing bed adhesion, or having a ton of visible lines with banding and little lines from non adhesion
-Typical terrible Polymaker winding: We all know Polymaker does the worst job winding their filament, this filament is no different.
My overall take is that unless you have a chamber heater at a minimum, and max your heat on everything, you have no chance of printing this with any level of success consistently. While it benchmarks exceptionally, the real world application and use of this unfortunately does not match the potential. I'm giving it 3 stars instead of two, because i think if you can create the extremely demanding conditions required by this filament that potentially this could be a great filament for you.
How does the ABS Pro do on overhangs?
This will depend on if you have cooling fans on or not. If you are not using cooling fans - then the added chamber heat and high printing temperature can make it so that overhangs will droop.
But if you have cooling set too high you could be battling with layer adhesion. So it is a balance.
But as a general answer - we would say that you will need supports at lower angles than you would with something like PLA.
