5-10 days
Payments
Descripción
Descripción
Polymaker™ ASA 3Filamento de impresión D: Resistente a la UV, rendimiento preparado al aire libre
El clima y la resistencia UV: Polymaker™ ASA 3El filamento de la impresora D está diseñado como una alternativa avanzada a ABSOfrece mejor resistencia meteorológica y excelente estabilidad UV. Esto lo hace uno de los mejores ASA Filamentos para el exterior Aplicaciones donde la exposición a la luz solar y los elementos es una preocupación.
robusto Propiedades mecánicas: Con fuerza mecánica y durabilidad comparable a ABSY esto ASA El plástico proporciona un rendimiento fiable para Piezas funcionales, cerraduras y prototipos que necesitan resistir las condiciones del mundo real.
La transición fácil de ABS: Polymaker™ ASA La impresión con Ajustes muy parecido a ABS, lo que hace que sea fácil de cambiar para los usuarios conocidos con ABS La impresión. Simplemente usar una Impresora 3D cerrada para garantizar el control óptimo de la temperatura y minimizar el calentamiento.
Perfecto para el exterior y Piezas funcionales: Elegir Polymaker™ ASA filamento para cualquier proyecto que exija resistencia UV, durabilidad del tiempo, y fuerte Propiedades mecánicasPerfecto para el exterior 3D impresión y resultados de larga duración.
Nota• Político ASA Ahora es Polymaker ASA. Puedes seguir recibiendo el envase antiguo a medida que pasamos.
Requisitos de impresión
Ajustes de impresión
Ajustes de impresión
Polymaker™ ASA
Características principales
- Resistencia UV
- Resistente al calor
- Fuerte y duradero
- Resistencia química
- Post-procesamiento
Polymaker™ ASA - Negro / 1kg está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
Tipos de impresión
- Secado: ASA absorbe poca humedad. Si el filamento solo ha estado expuesto brevemente en condiciones normales, normalmente basta con secarlo a 70 °C durante 4 horas. Utiliza el ajuste recomendado en la ficha técnica (TDS) de 70 °C durante 7 horas tras una exposición prolongada o cuando aparezcan defectos de impresión relacionados con la humedad.
- Placa de impresión: Aplica un adhesivo adecuado como capa de separación y deja que la placa de impresión se enfríe antes de retirar la impresión.
- Temperatura y Velocidad: Utiliza una temperatura de boquilla de 230-260 °C, una temperatura de cama de 75-95 °C y una Velocidad de impresión de 50-200 mm/s. Para imprimir más rápido o mejorar la Adhesión entre capas, utiliza 240-260 °C.
- Deformación y Adhesión entre capas: Utiliza una carcasa, evita las corrientes de aire y mantén apagado el ventilador de refrigeración. Imprime en un área bien ventilada.
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
¿Cuál es la diferencia entre ASA y ABS?
¿Tú tienes test Los resultados de la resistencia UV con ASA?
puede Polymaker™ ASA ¿Se trata con acetona?
¿Será que los espoles trabajarán en un AMS?
¿Es esto Material ¿El alimento seguro?
¿Vendéis los recortes?
Revisión
Customers praised this ASA filament for exceptional print quality, describing it as "top notch" with excellent repeatability and minimal warping. Many noted it "prints flawlessly" and is easier than PETG. Shoppers highlighted outstanding outdoor durability, UV resistance, and vibrant colors. Some mentioned minor warping with Pop Green and occasional filament tangling.
So the actual quality of this ASA filament might be good? I still can't tell. So far its only been failed prints trying to dial in settings that will work. But I am now almost 2 rolls in, and starting to get some successful prints. And when they work, the filament seems good.
Unfortunately, the profile that Polymaker recommends and provides on the site does not work at all and results in every print failing. You need to waste a spool or 2 trying settings to get it to print ok.
If you try to contact Polymaker for suggestions on improving the print settings, they have now set up an absolutely useless AI customer support for emails that does nothing but waste your time and offer the dumbest, irrelevant suggestions. How any company thinks this represents them well, I do not understand.
This is a huge step back for Polymaker, who I used to think had great customer service and was one of the reasons I wanted to start buying filament from them instead of from Bambu. Seeing the Polymaker shift to this garbage AI support, is a huge disappointment.
We had a play with Bambu AMS Purge settings to blend one ASA color into the next with zero purge and it turned out great
After 6 months out in the hottest summer on record the colours haven't faded
Through no fault of Polymaker, the tracking information showed that the Courier service lost the parcel somewhere between collecting it and their depot. After waiting for 10 days Polymaker sent out a replacement order so all ended well
A very good filament and easy to dial in prints. Achieved best results with a heated chamber to 60 C.
3kg spool of blue ASA.
This 3kg spool has been fantastic for printing. After some initial drying, the material has performed wonderfully with no clogs or other issues. The ASA sands and vapor smooths very well, with a really pleasing look afterwards.
I've been using Polymaker ASA to make a variety of auto interior and exterior pieces and the quality and repeatability of the filament is top notch.
Great product for printing large large free prints on Bambu P1S's. I reguarly print 250mm large options over 12h and this ASA is faultless, thankyou!
Always an easy print with Polymaker ASA. Lays down smooth. Prefer to print with this over PETG.
Love the color and material, 100% recommend
Highly recommend this ASA. Super durable and virtually weatherproof in static strength applications. Awesome colors too.
So far this is working very well. I tried some other ASA from Elegoo and it wouldn’t print right no matter what I tried and this has completely flipped my bad experience on its head. I read a bunch of other reviews and people only had good things to say about Polymaker so I’ve officially found my new filament source!
I've finally found a red that suits my wants. I've bought countless spools of red filament in various materials but the color has never been a deep red. This all changed with this ASA, it's for me the best red on the market as far as I know. Also it's super easy to print ! I had always been used to only printing PLA and PETG, and found ASA to be easier to print than PETG (given you have an enclosure of course).
Ordered in July and received today, July 18. Very well packaged with internal protection and vacuum-sealed film. Can't wait to start printing with this filament.
PLA Pro and ASA are our go-to filaments. Prints well. Love that it comes with profiles.
This is great ASA, prints extremely well, warps less than other ASA's I've used and the colors are perfect. Will be buying more in the future.
I only print ASA and your natural is the best I've ever used!
This ASA prints just as well as any PETG or PLA that I have tried. This is quickly becoming the default filament for me for anything that needs durability.
This asa filament printed perfectly and I have had 0 issues so far on my bambulab x2d.
Perfect for outdoor products
I was a bit terrified of using ASA filament for the first time, but I’m through 2 rolls of polymaker now and overall the experience was quite enjoyable. I had pretty good bed adhesion- using mouse ears on sharp corners with a 0mm gap. Easy to clean up post print. Very happy with the results.
