💰 REGÍSTRATE Y OBTÉN €8 DE DESCUENTO EN TU PRIMER PEDIDO

📦 POR TIEMPO LIMITADO ENVÍO GRATIS EN TODOS LOS PEDIDOS

Tiempo de entrega
5–10 días
Satisfacción garantizada
Devolución en 40 días
Pagos
seguros

Descripción

Easy to Print. Flexible with a More Refined Finish.

Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.

Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.

True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.

A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.

From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.

Requisitos de impresión


LayerHub ya está disponible. Una plataforma de perfiles de filamento creada por la comunidad — abierta a cada Marca de filamento y todas las impresoras. Cada perfil incluye una foto de una pieza realmente impresa como prueba.

Ajustes de impresión

Nozzle Temperature: 220–240°C
Build Plate Temperature: 35°C
Cooling Fan: 100%
Print Speed: 50–250 mm/s (250 mm/s is the maximum tested speed)
Retraction (Direct Drive): 0.8–1.2 mm
Retraction Speed: 30 mm/s
Chamber / Enclosure: Not required
Drying: 70°C for 6 hours

Polymaker™ TPU95 Matte

€25,99
SKU: PM1023040 Código HEX: #020303
<p>Ganas%20[points_amount]%20cuando%20compras%20este%20art%C3%ADculo.</p>

Características principales

  • True 95A Flexibility
  • Low-Gloss Matte Finish
  • Easy to Print
  • Up to 250 mm/s Tested
Diámetro
Peso
Color: Matte Negro

Métodos de pago

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Easy Printing, Refined Matte Results

Polymaker TPU95 Matte es un filamento TPU flexible de 1.75 mm, fácil de imprimir y con Acabado mate. 

Empieza con un perfil estándar para TPU 95A

Use your slicer’s standard TPU 95A profile as a starting point. Get smooth extrusion and a clean surface with less time spent tuning.

Un Acabado mate que puedes ver y sentir

Give phone cases and other handheld accessories a clean, low-gloss finish with less visible layer lines and a lightly grippy feel.

Imprime piezas flexibles a velocidades de hasta 250 mm/s

Diseñado para una extrusión uniforme con menos hilos y obstrucciones, TPU95 Matte alcanzó 250 mm/s en las pruebas, hasta 5× la velocidad de referencia de 50 mm/s del TPU 95A.

Flexibilidad Shore 95A que recupera su forma

Imprime piezas que se doblan y recuperan su forma, desde soportes para drones FPV y neumáticos RC hasta patas de muebles y accesorios flexibles para llevar puestos. Shore 95A equilibra la flexibilidad con la firmeza necesaria para una impresión fluida y el uso diario.

15 colores mate, de los clásicos a los pastel

Elige entre nueve tonos clásicos y seis suaves tonos pastel que se adapten a tu diseño, tanto si imprimes un accesorio práctico como una pieza decorativa divertida.

Compatibilidad con impresoras y cuidado del filamento

Compatible con la mayoría de las impresoras FDM que utilizan filamento de 1.75 mm. Utiliza un soporte de bobina externo en las configuraciones con AMS. Seca el filamento antes de imprimir y mantenlo sellado entre usos.

Descubre las creaciones de la comunidad

Consejos de impresión

  • Profile: Start with a standard 95A TPU or TPU HF profile. A direct-drive printer is generally easier to set up.
  • Build plate and cooling: Set the bed to 35°C and use 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.
  • Speed: With a 0.4 mm nozzle, use 50–250 mm/s. The upper end is the maximum tested speed. Adjust for your printer and model.
  • Direct-drive retraction: Start with 0.8–1.2 mm at 30 mm/s.
  • Drying and storage: Dry at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box while printing and during storage.
Propiedad X-Y Z Valor Método
Densidadg/cm³·ISO 1183 — — 1.17 g/cm³ Importante ISO 1183
Resistencia a la tracciónMPa·ISO 527 — 10.87 MPa Importante — ISO 527
Alargamiento a la rotura%·ISO 527 — 361 % Importante — ISO 527
Módulo de flexiónMPa·ISO 178 69.2 MPa Importante — — ISO 178
Temperatura de fusión°C·ISO 11357 — — 198.6 °C Importante ISO 11357
Temperatura de transición vítrea (Tg)°C·ISO 11357 — — -26.6 °C Importante ISO 11357

Ensayos realizados en probetas con 100% infill. X-Y = en el plano de las capas, Z = entre las capas (Adhesión entre capas).

Preguntas frecuentes

¿Tienes preguntas? Tenemos las respuestas. Desde elegir el Material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.

What is Polymaker™ TPU95 Matte?

It is a general-purpose flexible TPU with a Shore hardness of 95A and a low-gloss matte finish. It works well for parts that need to flex and recover their shape, such as protective covers, grips and vibration-damping feet.

Which printer and slicer profile should I start with?

A direct-drive printer is generally easier to set up. Start with a standard 95A TPU or TPU HF profile and tune it for your printer and model.

What nozzle, bed and fan settings should I use?

With a 0.4 mm nozzle, use 220–240°C at the nozzle, 35°C on the build plate and 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.

How fast can I print TPU95 Matte?

The recommended range is 50–250 mm/s with a 0.4 mm nozzle. The upper end is the maximum tested speed. Choose a speed that suits your printer, settings and model geometry.

What retraction settings should I use?

For direct drive, start with a retraction distance of 0.8–1.2 mm at 30 mm/s.

How should I dry and store TPU95 Matte?

Dry the filament at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box to keep it dry while printing and during storage.

Reseñas

Polymaker

Polymaker™ TPU95 Matte

€25,99 EUR

Easy to Print. Flexible with a More Refined Finish.

Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.

Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.

True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.

A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.

From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.

Diámetro

  • 1.75mm

Peso

  • 1kg

Color

Ver producto
€25,99