💰 REGÍSTRATE Y OBTÉN €8 DE DESCUENTO EN TU PRIMER PEDIDO

📦 POR TIEMPO LIMITADO ENVÍO GRATIS EN TODOS LOS PEDIDOS

Tiempo de entrega
5–10 días
Satisfacción garantizada
Devolución en 40 días
Pagos
seguros

Descripción

Easy to print, hard to break
Polymaker™ G-Flex PETG is a highly durable, elastic PETG that combines PETG’s printing ease and shape retention with TPU’s elasticity and impact absorption. Designed for everyday creations and long-term use, it brings toughness, fine detail, and added flexibility to functional parts, articulated models, props, cosplay accessories, and RC or drone parts.

Impact-tough durability for repeated use
From accidental drops to bending, assembly, and transport, G-Flex PETG helps prints withstand the demands of real-world use. Its elasticity and impact absorption make it a durable choice for parts that need more toughness than PLA. In ISO 179-1 unnotched Charpy impact testing, all tested specimens recorded “No Break” in both XY and Z orientations under the test conditions.

PETG-like printing ease, fine details included
G-Flex PETG makes tough, elastic prints accessible to users familiar with PLA and PETG. It retains defined shapes, fine features, and complex geometry, making it well suited for moving joints, intricate models, and snap-fit assemblies.
Recommended settings and common printer presets provide a straightforward starting point. With print speeds up to 300 mm/s and volumetric flow up to 24 mm³/s, it supports efficient printing when speed and flow are configured together.

Safety from printing to handling
G-Flex PETG offers VOC-certified low-emission printing and complies with EN 71-3 (toy safety) for migration of certain elements. Its resistance to brittle breakage helps reduce sharp fragments during handling and support removal.

Bright colors for fun and functional prints
Bring your ideas to life with 6 colors. From expressive models and colorful props to practical everyday parts, the palette gives you more room to create. Compatibility with Bambu AMS, AMS 2 Pro, and Creality CFS, using the recommended settings, supports multicolor projects.

Requisitos de impresión

Use an FDM printer capable of a 230–240°C nozzle temperature and a 70°C heated bed. A PEI build surface without glue is recommended. Start with the recommended preset for your printer and adjust settings to suit your setup. Use G-Flex PETG or PLA as support material.Each spool contains 1 kg of 1.75 mm filament, factory-dried and vacuum-sealed for printing straight from the bag. Reseal with desiccant after use. If moisture-related stringing appears, dry at 70°C for at least 6 hours before printing again.


LayerHub ya está disponible. Una plataforma de perfiles de filamento creada por la comunidad — abierta a cada Marca de filamento y todas las impresoras. Cada perfil incluye una foto de una pieza realmente impresa como prueba.

Ajustes de impresión

  • Printing Temperature: 230°C - 240°C
  • Bed Temperature: 70°C
  • Nozzle Type: Use a standard nozzle. High-flow nozzles are not recommended, as they may reduce interlayer toughness.
  • Build Surface: PEI; no glue required. Do not use cryo/cold-print build plates such as BIQU CryoGrip.
  • Printing Speed: Up to 300 mm/s
  • Maximum Volumetric Flow: Up to 24 mm³/s
  • Fan: 0% - 90%
  • Flow Ratio: 1.00 - 1.02
  • Support Material: G-Flex PETG or PLA
  • Multi-Material System Compatibility: Bambu AMS, AMS 2 Pro, and Creality CFS; use recommended settings.
  • Drying Settings: Oven: 70°C for at least 6 hours.

(Only if the material has absorbed moisture. Factory-dried and vacuum-sealed; ready to print from the bag.)

  • Storage: Reseal with desiccant after use.

Can't find your profiles? Check out our official presets at presets.polymaker.com.

Polymaker™ G-Flex PETG

€21,99
1.75mm SKU: PM1022069 Código HEX: #F0EFEA
<p>Ganas%20[points_amount]%20cuando%20compras%20este%20art%C3%ADculo.</p>

Características principales

  • Hard to Break
  • Easy Printing
  • Fine Detail
  • Low-Emission Printing
Diámetro
Peso
Color: Blanco

Métodos de pago

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Fácil de imprimir, difícil de romper

Polymaker™ G-Flex PETG es un filamento PETG elástico que combina una Impresión sencilla y detalles finos con la tenacidad necesaria para resistir caídas, flexiones y uso repetido.

Se imprime como el PETG, absorbe impactos como el TPU

G-Flex PETG combina la facilidad de impresión y la conservación de la forma del PETG con la absorción de impactos del TPU. Cede más que el PETG estándar y conserva su forma mejor que el TPU blando, por lo que es adecuado para piezas detalladas que necesitan flexionarse.

Diseñado para resistir golpes

G-Flex PETG se flexiona para absorber impactos y ayuda a las piezas impresas a resistir caídas accidentales y golpes cotidianos.

Impresiones complejas, detalles excepcionales

Desde las extremidades finas de figuras articuladas hasta las texturas superficiales complejas, G-Flex PETG conserva los detalles que dan vida a un diseño.

Seguridad desde la impresión hasta la manipulación

G-Flex PETG está certificado por sus bajas emisiones de VOC en las condiciones de impresión ensayadas y cumple los requisitos de EN 71-3 sobre la migración de ciertos elementos.

Diseñado para flexiones repetidas

Imprime uniones snap-fit, clips y piezas flexibles que se doblan durante el montaje y conservan su forma durante el uso. G-Flex PETG aporta a las piezas móviles la flexibilidad necesaria para montajes, ajustes y manipulaciones repetidos.

Hecho para los objetos que usas

Imprime piezas protectoras RC para recorridos todoterreno, figuras articuladas para manipular repetidamente y accesorios de cosplay que se flexionan con tus movimientos.

Disponible en seis colores

Elige entre tonos intensos y neutros versátiles. ¡Pronto llegarán más colores!

Descubre las creaciones de la comunidad

Consejos de impresión

  • Preset: Start with the official G-Flex preset for your printer and slicer. Use a standard 0.4 mm nozzle as the starting point.
  • Build plate: Set the bed to 70°C and use a PEI surface without glue. Avoid cold-print plates such as BIQU CryoGrip.
  • Speed and flow: Set print speed and volumetric flow together. Use up to 300 mm/s and up to 24 mm³/s.
  • Cooling and retraction: Use 0–90% cooling. For direct-drive extruders, start with 1.0 mm retraction at 30 mm/s.
  • Drying and storage: Print straight from a freshly opened bag and reseal the spool with desiccant after use. If moisture causes stringing, dry with PolyDryer Level 3 for 24 hours, AMS 2 Pro at 65°C for 24 hours, or an oven at 70°C for at least 6 hours.
Propiedad X-Y Z Valor Método
Densidadg/cm³·ISO 1183 — — 1.25 g/cm³ Importante ISO 1183
Resistencia a la tracciónMPa·ISO 527 40.27 MPa Importante 18.49 MPa Importante — ISO 527
Alargamiento a la rotura%·ISO 527 306.53 % Importante 104.82 % Importante — ISO 527
Resistencia a la flexiónMPa·ISO 178 13.96 MPa Importante 10.61 MPa Importante — ISO 178
Módulo de flexiónMPa·ISO 178 451.55 MPa Importante 350.29 MPa Importante — ISO 178
Módulo de YoungMPa·ISO 527 431.49 MPa Importante 330.7 MPa Importante — ISO 527
Resistencia al impacto Charpy, sin entallaISO 179 No Break Importante No Break Importante — ISO 179
Temperatura de transición vítrea (Tg)°C·ISO 11357 — — 63.8 °C Importante ISO 11357
Temperatura de reblandecimiento Vicat°C·ISO 306 — — 89.9 °C Importante ISO 306
HDT (0.45 MPa)°C·ISO 75 — — 61.5 °C Importante ISO 75
HDT (1.8 MPa)°C·ISO 75 — — 46.7 °C Importante ISO 75

Ensayos realizados en probetas con 100% infill. X-Y = en el plano de las capas, Z = entre las capas (Adhesión entre capas).

Preguntas frecuentes

¿Tienes preguntas? Tenemos las respuestas. Desde elegir el Material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.

¿Qué es G-Flex PETG?

Es un PETG elástico y resistente a los impactos que se imprime con la misma facilidad que el PETG estándar. Se flexiona y absorbe los impactos en lugar de romperse, de modo que las piezas resisten caídas, flexiones y el manejo diario.

¿Por qué es difícil de romper?

Elasticity and impact absorption improve the durability of printed parts. All tested specimens recorded No Break in XY and Z unnotched Charpy impact testing under ISO 179-1. How a finished part holds up still depends on its design, wall thickness, print orientation and settings.

¿En qué se diferencia del PETG estándar y del TPU blando?

It adds elasticity and impact absorption to PETG-like printing ease and shape retention. Compared with soft TPU, it retains defined structures and fine detail for complex, articulated objects that need to hold their shape.

¿Con qué perfil de impresión debo empezar?

Use the G-Flex preset for your printer on presets.polymaker.com. If there is none yet, start from Bambu PLA Silk (Bambu Lab), Elegoo PLA Silk (Elegoo), Generic PLA (Creality and Snapmaker), Generic PLA Silk (Prusa) or Anycubic PLA-CF (Anycubic).

Does it need drying before printing?

Not at first. Every spool is dried and vacuum-sealed at the factory, so you can print straight from the bag. Reseal it with the desiccant after use. If you see stringing, dry it: PolyDryer Level 3 for 24 hours, AMS 2 Pro at 65°C for 24 hours, or an oven at 70°C for at least 6 hours.

¿Cómo debo almacenarlo después de usarlo?

Reseal the spool with desiccant to reduce moisture absorption. If moisture-related stringing appears when printing again, dry the material before continuing.

¿Puedo utilizar un sistema multicolor?

Yes. It is compatible with multicolour systems such as Bambu AMS, AMS 2 Pro and Creality CFS.

What nozzle, bed and speed settings should I use?

Utiliza una Boquilla a 230–240°C, una cama a 70°C y una superficie PEI sin pegamento. No se recomiendan boquillas High-flow, ya que pueden reducir la tenacidad entre capas. No utilices placas cryo (de impresión en frío), como BIQU CryoGrip. La Velocidad de impresión alcanza 300 mm/s y el flujo volumétrico 24 mm³/s. Ajusta la Velocidad y el flujo conjuntamente.

Reseñas

  • 5 stars: 0 (0%)
  • 4 stars: 2 (100%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
g
gorgon
double the price in Japan, how unusual.

and, of course, it's $25 in Japan.

D
Dale S.
This review is based on expected outcome

This review is based on expected outcomes the store is sold out of every colour, however some if the instructions; namely drying contradicts the TDS.

The 70 °C drying figure is above the 63.8 °C Tg and the 61.5 °C HDT, so Polymaker's own sheet contradicts itself. Nothing in the TDS explains it

While the recommended drying temperature of 70°C is above the Tg (63.8°C) and HDT (61.5°C), these values measure different material properties.

Tg is the temperature at which the material starts to become more flexible, rather than melt. HDT measures deformation under a specific mechanical load, which differs from normal drying conditions.

Drying at 70°C helps remove moisture more efficiently while remaining below the material’s Vicat softening temperature (89.9°C).

We appreciate your observation and agree that this could be better explained in our documentation. We hope this clarifies the apparent contradiction!

Polymaker

Polymaker™ G-Flex PETG

€21,99 EUR
Easy to print, hard to break
Polymaker™ G-Flex PETG is a highly durable, elastic PETG that combines PETG’s printing ease and shape retention with TPU’s elasticity and impact absorption. Designed for everyday creations and long-term use, it brings toughness, fine detail, and added flexibility to functional parts, articulated models, props, cosplay accessories, and RC or drone parts.

Impact-tough durability for repeated use
From accidental drops to bending, assembly, and transport, G-Flex PETG helps prints withstand the demands of real-world use. Its elasticity and impact absorption make it a durable choice for parts that need more toughness than PLA. In ISO 179-1 unnotched Charpy impact testing, all tested specimens recorded “No Break” in both XY and Z orientations under the test conditions.

PETG-like printing ease, fine details included
G-Flex PETG makes tough, elastic prints accessible to users familiar with PLA and PETG. It retains defined shapes, fine features, and complex geometry, making it well suited for moving joints, intricate models, and snap-fit assemblies.
Recommended settings and common printer presets provide a straightforward starting point. With print speeds up to 300 mm/s and volumetric flow up to 24 mm³/s, it supports efficient printing when speed and flow are configured together.

Safety from printing to handling
G-Flex PETG offers VOC-certified low-emission printing and complies with EN 71-3 (toy safety) for migration of certain elements. Its resistance to brittle breakage helps reduce sharp fragments during handling and support removal.

Bright colors for fun and functional prints
Bring your ideas to life with 6 colors. From expressive models and colorful props to practical everyday parts, the palette gives you more room to create. Compatibility with Bambu AMS, AMS 2 Pro, and Creality CFS, using the recommended settings, supports multicolor projects.

Diámetro

  • 1.75mm

Peso

  • 1kg

Color

Ver producto
€21,99