5-10 days
Payments
Descripción
Descripción
Fiberon™ PA12-CF10: PA12 reforzado con fibra de carbono para impresiones de alto rendimiento (anteriormente PolyMide™ PA12-CF)
Resistencia mecánica y estabilidad dimensional de nivel profesional
Fiberon™ PA12-CF10 es un filamento de copoliamida de cadena larga (PA12) reforzado con fibra de carbono, diseñado para aplicaciones industriales y de ingeniería exigentes. Con un contenido de fibra de carbono del 10 %, ofrece una resistencia mecánica, rigidez y resistencia térmica excepcionales, por lo que es ideal para piezas que requieren durabilidad, precisión y una deformación mínima.
Baja sensibilidad a la humedad
Gracias a su avanzada estructura química, Fiberon™ PA12-CF10 absorbe mucha menos humedad que los materiales basados en PA6/66 y PA6. Esto garantiza una precisión dimensional y unas propiedades mecánicas constantes, incluso en entornos húmedos.
Propiedades mejoradas frente a PA12 estándar
Fiberon™ PA12-CF10 supera a los filamentos estándar basados en PA12 tanto en resistencia como en resistencia térmica, y proporciona una solución fiable para prototipos funcionales, piezas de uso final y herramientas de fabricación.
Tecnología Warp-free™
Este filamento incorpora la tecnología Warp-free™ para ofrecer una excelente estabilidad dimensional y minimizar la deformación, incluso en impresiones grandes o complejas.
Calidad constante
Fiberon™ PA12-CF10 utiliza la misma fórmula de confianza que PolyMide™ PA12-CF, aunque las impresiones pueden presentar un tono negro ligeramente más oscuro.
Elige Fiberon™ PA12-CF10 cuando necesites un filamento que combine alta resistencia, baja sensibilidad a la humedad y una excelente estabilidad dimensional para la impresión 3D avanzada de ingeniería e industrial.
Fiberon™ PA12-CF10 utiliza la misma fórmula excelente que PolyMide PA12-CF, aunque Fiberon™ PA12-CF10 puede imprimirse con un tono negro ligeramente más oscuro que su predecesor.
Requisitos de impresión
Ajustes de impresión
Ajustes de impresión
Fiberon™ PA12-CF10
- Lowest Moisture Absorption
- High Strength & Heat Resistance
- Warp-Free™ Technology -
- Ready to Print -
Fiberon™ PA12-CF10 - 1.75mm (Nuevo embalaje) / 0.5kg / Negro está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
- Utilice una boquilla resistente al desgaste, como una de acero endurecido o zafiro, porque el refuerzo de fibra de carbono es abrasivo.
- Almacene e imprima en condiciones secas (humedad relativa inferior al 20 %); seque a 100 °C durante 10 horas antes de usarlo.
- Utilice una plataforma de impresión a 40-50 °C y APAGUE el ventilador de refrigeración; no se requiere una cámara con calefacción activa.
- Si el material se utiliza como su propio soporte, retire el soporte antes de que absorba demasiada humedad para evitar una adhesión permanente.
- Realice un recocido a 100 °C durante 16 horas cuando se requiera el rendimiento tras el recocido indicado en la Ficha Técnica de Datos (TDS) vigente.
| Property | X-Y | Z | Value | Method |
|---|---|---|---|---|
| Density | — | — | 1.06 g/cm³ Important | ISO 1183 |
| Tensile strength | 77.4 MPa Important | 52.2 MPa Important | — | ISO 527 |
| Elongation at break | 4.2 % Important | 5 % Important | — | ISO 527 |
| Bending strength | 112.4 MPa Important | 69.8 MPa Important | — | ISO 178 |
| Bending modulus | 2886.5 MPa Important | — | — | ISO 178 |
| Young's modulus | 3311.2 MPa Important | 1806.6 MPa Important | — | ISO 527 |
| Charpy, unnotched | — | 27.6 KJ/m² Important | — | ISO 179 |
| Charpy, notched | 9.9 KJ/m² Important | — | — | ISO 179 |
| Melting temperature | — | — | 171 °C Important | ISO 11357 |
| Glass transition temperature (Tg) | — | — | 55 °C Important | ISO 11357 |
| Vicat softening temperature | — | — | 170.2 °C Important | ISO 306 |
Probado en muestras con un 100 % de relleno. X-Y = transversal a las capas, Z = entre las capas (adhesión entre capas).
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
What is annealing?
What is moisture conditioning?
Should I anneal before or after moisture conditioning?
Why do you use such a low build plate temperature with your nylons?
Will the spools work in an AMS?
Can you offer 1KG Fiberon™ Spool Options?
Customers praised this carbon fiber filament as "very easy to print" with "very smooth" surface finish. Reviews highlight exceptional strength and durability, ideal for functional parts and RC applications. While "very pricey," customers consistently said "you get what you pay for." Note: requires proper drying due to moisture sensitivity.
For RC airplane parts this is the strongest filament that won’t shatter on a rough landing.
First time trying to print PA/CF and this stuff has been so much easier than I expected. Far exceeded my expectations and dang if the prints don't look awesome. Picture is literally my first test print. Amazing stuff, will absolutely buy again and now want to try the different versions.0.6mm Hardened Steel Nozzle290C hotend 50C bed (only first layer, then down to 35C)NO part cooling (I even removed the shroud to be sure)No enclosurePrinting from filament drier @65C
Very easy to print. Surface finish is very smooth.
Works and prints well, better with no support on the Bambu.
This material is great. Very easy to print. The provided stock profile preformed amazing. No warping and dimension held to the cad model. our part is holdingup very well in production.
Great filament very strong durable and easy to print with the right settings
I thought it printed quite easily compared to CarbonX HTN-CF. Less nozzle drip at similar temps and it is more responsive to processing temperatures when tuning for strength or toughness at desired layers. Works well as a break off support material when processed at higher temperatures due to degradation driven embrittlement. Very versatile filament.
This filament is very pricey; I figure it's around 5X+ the price of most filaments! But, as the old saying goes, "you get what you pay for!", which definitely applies in this case. In the past 4 years, I've printed THOUSANDS of items, most personally-designed, and I've used over a HUNDRED spools of filament such as PC, PLA, TPU, ABS, Nylon, Carbon fiber PC and PETG, etc. Lots of brands, lots of types. I'm a 74 year old retired Engineer, and LOVE to design and print 3D stuff. And, I'm NOT talking about 'trinkets, models and masks' either!!! I'm talking real tools and hardware,....real-world, "it's gotta be TOUGH" stuff! I've recently had to design and built the TOUGHEST thing I've ever printed, a one-to-two blades adapter for my edger. After at least a 10 versions, I finally came up with an 'elegant' design, but the plain Nylon I was using wasn't cutting it. Just too much warpage and dimensional instability. So, after reading the review by Tonia, I decided to give this filament a try. OK, I'll cut to the chase....If you need something TOUGH, something that does not warp, something that prints BEAUTIFULLY, and looks BEAUTIFUL, look no further. Hands down the best filament I've ever, ever used. And, I'm talking about ALL filaments I've used! VERY Pricey. BUT, "You get what you pay for"! And, for all you Polymaker folks who were part of developing this filament: GOOD JOB, VERY WELL DONE!!!! Starting first layer temp at 260 C. Bed at 50. Then up to 280 C for layers 2+, same bed temp. NO FAN, EVER!!! Enclosed. PRUSA MK3S+, Textured Utilistik bed. Elmer's Purple on bed. Perfect prints. If your print has to be absolutely perfect and strong, this is the filament! Worth every penny.
Expensive, but it prints well.
wonderful right out of the box, usually you have to dry this stuff. Prints very clean, no warping
This is my favorite filament for things that need to be relatively stiff and take impact. It also does really well under high temps. I print at 300c with low cooling. This is VERY hydroscopic. right out of the bag, it prints really cleanly with no oozing but a even a day in with my heated dry box aesthetics start to suffer. That's just the nature of true PA6.I highly recommend for 2a
So Prusaslicer doesn't have a Polyamide profile. So I made one based on Fiberlogy Nylon PA12. Then I changed the bed temp to 50c both first layer and others. That's all.My second thing I did after reviewing was make a dry box. I dried the filament to 10% humidity.I bought this filament to print replacement parts for my Prusa MK3 Hotend. I have tried printing with nylon in the past and it turned out BAD! But polymaker says "PA12" has a less humidity problem so I bought this roll. Also there was a huge sale!So its been a while to make my dry box and I printed the hotend parts. WOW its so beautiful!!! If this didn't cost so much I would print a ton with it!!! The pictures people show don't do it justice! It doesn't even feel like the other plastics I have printed. I am debating of replacing every part on my printer just to have that look! but should I... I am going to print another hotend set just in case of problems in a few years. Sadly It only comes with .5kg so half a roll. I think this will go fast just to print parts for my printer. Oh well. worth it!
