5–10 días
seguros
Descripción
Descripción
Listo para el calor. Listo para los impactos. Sigue siendo PLA
Polymaker™ HT-PLA Pro es un PLA resistente para piezas funcionales que necesitan mayor durabilidad en el uso real. Se imprime con la misma facilidad que el PLA estándar y mantiene su forma sin carga en entornos cálidos. Está diseñado para makers, ingenieros y granjas de impresión que necesitan una durabilidad real sin añadir complejidad a la impresión.
No se comba hasta 150 °C directamente después de la impresión
Polymaker™ HT-PLA Pro está diseñado para mantener su forma en entornos expuestos al calor sin carga. Su temperatura de reblandecimiento Vicat alcanza 148.3 °C directamente después de la impresión y 150.5 °C después del Recocido, probado fuera de la placa y sin carga. Para aplicaciones que requieren resistencia térmica bajo carga, es necesario el recocido. Un recocido de 30 minutos a 100 °C aumenta la Temperatura de deflexión térmica (HDT a 0.45 MPa) de 56.3 °C a 107.6 °C. Esto lo hace más adecuado para usos en entornos cálidos, como alféizares soleados o piezas colocadas cerca de maquinaria que emite calor.
2 veces más durabilidad que el PLA
HT-PLA Pro mantiene unas sólidas propiedades térmicas y mejora al mismo tiempo el rendimiento mecánico. En comparación con el HT-PLA normal, ofrece una resistencia al impacto más de 2 veces superior (9.94 kJ/m² frente a 4.94 kJ/m²) y una adhesión entre capas en el eje Z un 30% superior (26.8 MPa frente a 20.8 MPa). Esto ayuda a que las piezas impresas resistan los impactos y la separación a lo largo de las líneas de capa.
Se imprime con configuraciones de PLA
A diferencia de muchos filamentos de alta temperatura, HT-PLA Pro se imprime con configuraciones estándar de PLA. Funciona en la mayoría de las impresoras FDM estándar, sin necesidad de cámara cerrada, hotend especializado ni ajustes complejos. Con velocidades de impresión de hasta 300 mm/s, puede integrarse en los flujos de producción existentes con cambios mínimos.
Nota: el Recocido es necesario para obtener resistencia térmica bajo carga
Haz clic en el enlace para consultar las recomendaciones de recocido
Requisitos de impresión
LayerHub Ahora está vivo. Una casa construida por la comunidad para los presetos de filamento — abierto a cada filamento Marca, cada impresora. Cada preseta viene con una foto de impresión real para demostrarlo.
Ajustes de impresión
Ajustes de impresión
Polymaker™ HT-PLA Pro
Polymaker™ HT-PLA Pro - Negro / 1kg está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
| Propiedad | X-Y | Z | Valor | Método |
|---|---|---|---|---|
| Resistencia a la tracción | 37.6 MPa Importante | 26.8 MPa Importante | — | ISO 527 |
| Alargamiento a la rotura | 13 % Importante | 2.6 % Importante | — | ISO 527 |
| Resistencia a la flexión | 60.1 MPa Importante | 37.1 MPa Importante | — | ISO 178 |
| Módulo de flexión | 2.21 MPa Importante | 1.91 MPa Importante | — | ISO 178 |
| Módulo de Young | 2.27 MPa Importante | 1.85 MPa Importante | — | ISO 527 |
| Resistencia al impacto Charpy, sin entalla | 45.7 KJ/m² Importante | 10.3 KJ/m² Importante | — | ISO 179 |
| Resistencia al impacto Charpy, con entalla | 9.94 KJ/m² Importante | — | — | ISO 179 |
| Temperatura de fusión | — | — | 173.35 °C Importante | ISO 11357 |
| Temperatura de transición vítrea (Tg) | — | — | 59.15 °C Importante | ISO 11357 |
| Temperatura de reblandecimiento Vicat | — | — | 148.3 °C Importante | ISO 306 |
| HDT (0.45 MPa) | — | — | 56.3 °C Importante | ISO 75 |
| HDT (1.8 MPa) | — | — | 53.8 °C Importante | ISO 75 |
Probado en muestras con un 100 % de relleno. X-Y = transversal a las capas, Z = entre las capas (adhesión entre capas).
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
¿Realmente no necesita Cámara cerrada?
¿Es más duro que HT-PLA?
¿Es resistente a la UV?
¿Es el Acabado superficial matte?
¿Puedo anularlo?
Revisión
Customers praised this heat-resistant filament for exceptional print quality and ease of use. Many noted it "prints beautifully" with smooth finishes and strong parts. Shoppers appreciated the heat resistance for car-safe items and vibrant color options, especially burnt orange. Some mentioned settings need tweaking, and one reported a color shipping error.
I have purchased a few spools of HT-PLA Pro and honestly, I don't want to use anything else. This stuff prints beautifully with fully calibrated and its incredibly resilient. I've had it in a desiccant pod for my AMS HT while drying out some filament and it had no warping. The blue is a great color too. 10/10 would and will buy again.
Using for RC Planes and is strong! Also printing one wall quite light.
This material was perfect for when you just need a little something more than normal PLA. I had a friend who needed a part for his son's toy and it needed to be subject to some playful forces. As a result, I reached for some HT-PLA Pro and it turned out amazingly!
Works well, layer strength is improved. stands up to heat very well. The Pro can be annealed to keep its shape when put in the sun. Using this for most of my prints and now. Oh, and it prints great with PLA settings!
Printed great, best pla print ive had so far. I don't wish the purple was more blueish, comes out pretty red leaning
I dried the package for the recommended time before printing. I loaded up the settings for my P1S I downloaded directly from the Polymaker site. I have about 5 longer prints on this and the results are nice. The settings need to be tweaked for perfection but so far so good.
Im 65percent through a 40 hour print , and I have to say that this ht-pla pro print great so far. Printing at 230 degrees, fans at 40 percent, and slow speed. Haven't had any warping , or problems. I cant wait to get some different colors so I can do some more prints with it.
This prints up really nice. Still trying to get it to deform in the car. Will buy again.
Picked up a roll of black, dark gray, and burnt orange for some planned projects. Used the PolyMaker print profile for my K2 Pro and this stuff prints beautifully.
The Burnt Orange has to be my favorite shade of orange filament I have used so far. And the Dark Gray contrasts it quite nicely for 2 tone projects.
Got it for the Beard, jkjk
Excellent color
wonderful printing
Super terrific filament. This filament prints beautifully and has a wonderful smooth finish. Parts printed are super strong and hard. I tried the blue and the yellow so far and they are both terrific!
Love this stuff! It’s better than PLA Pro.
prints just like PLA this stuff is great!!!!!!!!!!
Great filament, just takes some tuning. But it will figure itself out.
I had seen an early review video on HT-PLA Pro and felt like I had the perfect project to try it out - a simple lid for my wife's facial wax heater. The things run quite hot to keep the wax at temperature but I wanted a lid to cover the molten wax for safety reasons. A temperature resistant material was called for.
I won't bore you too much with the design - think hemisphere with a large void under the dome where the wax container sits. Being that it had a curved top, I decided to print it right-side-up, which meant having a lot of support for the large void area.
I loaded up the HT-PLA Pro on my Bambu A1 Mini, modified a Polylite PLA profile to increase the nozzle temp a bit (per the box instructions) and set it to printing.
The result was flawless and all that support came out in one block with a slight tug with plyers, leaving a very smooth interior. All of the surface areas were excellent and after several days of use my wife is very pleased with it and there are zero artifacts or any sort of warping.
It is a big deal when you order Pink and they give you 2 Purple rolls. Now I won't be able to make an item for a client and lost business! I truly doubt Polymaker will make this right, seems another reviewer got Purple instead of Pink. Definitely a quality control issue!
Also Fake 5 star reviews from L.H. 3 reviews try to boost ratings
We are very sorry about this! There was an initial issue of our SKU syncing wrong but that has been fixed and we are happy to replace with no return needed! Just reach out to support@polymaker.com and we can get that handled for you.
As for fake reviews - we certainly are not making any reviews! I see the 3 duplicate reviews now and will remove two of them.
EDIT: Well looks like I am unable to remove verified reviews from customers even when they seem to be duplicates like this - I am sending to web team to investigate.
This review is mainly here to balance out the silly person who gave a new product a 1 star review because polymaker mixed up purple and pink, oh the horror.
My first order of 10 rolls showed up perfectly and my first print in HT-PLA-Pro also printed perfectly. It is a high impact object where previous HT-PLA’s have not worked well because of layer adhesion issues. Only time will tell, but so far so good.
I’ll be leaving this test print in my hot car to watch for warping. If this review is still at 5 stars, assume everything has worked out well.
I printed the obligatory Benchy and a couple other items to test. This prints flawlessly right out of the box. I used the Polymaker HT PLA Pro profile settings for my printer. I am looking forward to doing more with PLA that I don’t need to worry about getting too hot or leaving it in the car.
I’m missing the roll of pink ht pla pro, you have sent a purple in its place. I would like to request a correction though the website has made it very difficult. Money back or correction because you messed up please.
We are sorry if there were any fulfillment issues! Please reach out to us at support@polymaker.com with photos and order details and we can help further!
This is my GoTo filament for Higher Impact, UV resistant, Outdoor projects. I do no have any 3D printed items that remain outdoors 24x7. But I do have items that are outside for hours at a time. HT-PLA Pro prints just like PLA, if you use the Polymaker settings provided in their filament profile.
This is my GoTo filament for Higher Impact, UV resistant, Outdoor projects. I do no have any 3D printed items that remain outdoors 24x7. But I do have items that are outside for hours at a time. HT-PLA Pro prints just like PLA, if you use the Polymaker settings provided in their filament profile.
