Polymaker™ HT-PLA Pro
Polymaker™ HT-PLA Pro - 1.75mm / 1kg / Noir est en rupture de stock et sera expédié dès qu'il sera de nouveau disponible.
Impossible de charger la disponibilité pour le retrait
Prêt pour la chaleur. Prêt pour les chocs. Toujours du PLA
Polymaker™ HT-PLA Pro est un PLA robuste pour les pièces fonctionnelles nécessitant une meilleure durabilité en usage réel. Il s'imprime aussi facilement que le PLA standard et conserve sa forme sans charge dans des environnements chauds. Il est conçu pour les makers, ingénieurs et fermes d'impression qui ont besoin d'une durabilité réelle sans complexité d'impression supplémentaire.
Ne s'affaisse pas jusqu'à 150 °C directement sur le plateau
Polymaker™ HT-PLA Pro est conçu pour garder sa forme dans des environnements exposés à la chaleur sans charge. Sa température de ramollissement Vicat atteint 148,3 °C directement sur le plateau d'impression et 150,5 °C après recuit, testée hors plateau sans charge. Pour les applications nécessitant une résistance à la chaleur sous charge, le recuit est nécessaire. Un recuit de 30 minutes à 100 °C augmente la température de déformation thermique (HDT @ 0,45 MPa) de 56,3 °C à 107,6 °C. Cela le rend mieux adapté aux cas d'utilisation en milieu chaud comme les rebords de fenêtres exposés au soleil ou les pièces placées près de machines émettant de la chaleur.
Durabilité 2x supérieure au PLA
HT-PLA Pro conserve de fortes propriétés thermiques tout en améliorant les performances mécaniques. Comparé au HT-PLA classique, il offre plus de 2x plus de résistance aux chocs (9,94 kJ/m² contre 4,94 kJ/m²) et une adhésion intercouche sur l’axe Z supérieure de 30% (26,8 MPa contre 20,8 MPa). Cela aide les pièces imprimées à résister aux impacts et à la fissuration le long des lignes de couche.
S’imprime avec les réglages PLA
Contrairement à de nombreux filaments haute température, HT-PLA Pro s’imprime avec les réglages standards du PLA. Il fonctionne sur la plupart des imprimantes FDM standard, sans enceinte, sans buse spéciale, ni réglages complexes. Supportant des vitesses d’impression jusqu’à 300 mm/s, il peut s’intégrer aux flux de production existants avec un minimum de modifications.
Veuillez noter : le recuit est nécessaire pour la résistance à la chaleur sous charge
Cliquez sur le lien pour voir les recommandations de recuit
Exigences d'impression
Paiement et sécurité
Méthodes de paiement
Vos informations de paiement sont traitées en toute sécurité. Nous ne stockons pas les détails de votre carte de crédit et n'avons pas accès à vos informations de carte de crédit.
Im 65percent through a 40 hour print , and I have to say that this ht-pla pro print great so far. Printing at 230 degrees, fans at 40 percent, and slow speed. Haven't had any warping , or problems. I cant wait to get some different colors so I can do some more prints with it.
This prints up really nice. Still trying to get it to deform in the car. Will buy again.
Picked up a roll of black, dark gray, and burnt orange for some planned projects. Used the PolyMaker print profile for my K2 Pro and this stuff prints beautifully.
The Burnt Orange has to be my favorite shade of orange filament I have used so far. And the Dark Gray contrasts it quite nicely for 2 tone projects.
Got it for the Beard, jkjk
Excellent color
wonderful printing
Super terrific filament. This filament prints beautifully and has a wonderful smooth finish. Parts printed are super strong and hard. I tried the blue and the yellow so far and they are both terrific!
Love this stuff! It’s better than PLA Pro.
prints just like PLA this stuff is great!!!!!!!!!!
Great filament, just takes some tuning. But it will figure itself out.
I had seen an early review video on HT-PLA Pro and felt like I had the perfect project to try it out - a simple lid for my wife's facial wax heater. The things run quite hot to keep the wax at temperature but I wanted a lid to cover the molten wax for safety reasons. A temperature resistant material was called for.
I won't bore you too much with the design - think hemisphere with a large void under the dome where the wax container sits. Being that it had a curved top, I decided to print it right-side-up, which meant having a lot of support for the large void area.
I loaded up the HT-PLA Pro on my Bambu A1 Mini, modified a Polylite PLA profile to increase the nozzle temp a bit (per the box instructions) and set it to printing.
The result was flawless and all that support came out in one block with a slight tug with plyers, leaving a very smooth interior. All of the surface areas were excellent and after several days of use my wife is very pleased with it and there are zero artifacts or any sort of warping.
It is a big deal when you order Pink and they give you 2 Purple rolls. Now I won't be able to make an item for a client and lost business! I truly doubt Polymaker will make this right, seems another reviewer got Purple instead of Pink. Definitely a quality control issue!
Also Fake 5 star reviews from L.H. 3 reviews try to boost ratings
We are very sorry about this! There was an initial issue of our SKU syncing wrong but that has been fixed and we are happy to replace with no return needed! Just reach out to support@polymaker.com and we can get that handled for you.
As for fake reviews - we certainly are not making any reviews! I see the 3 duplicate reviews now and will remove two of them.
EDIT: Well looks like I am unable to remove verified reviews from customers even when they seem to be duplicates like this - I am sending to web team to investigate.
This review is mainly here to balance out the silly person who gave a new product a 1 star review because polymaker mixed up purple and pink, oh the horror.
My first order of 10 rolls showed up perfectly and my first print in HT-PLA-Pro also printed perfectly. It is a high impact object where previous HT-PLA’s have not worked well because of layer adhesion issues. Only time will tell, but so far so good.
I’ll be leaving this test print in my hot car to watch for warping. If this review is still at 5 stars, assume everything has worked out well.
I printed the obligatory Benchy and a couple other items to test. This prints flawlessly right out of the box. I used the Polymaker HT PLA Pro profile settings for my printer. I am looking forward to doing more with PLA that I don’t need to worry about getting too hot or leaving it in the car.
I’m missing the roll of pink ht pla pro, you have sent a purple in its place. I would like to request a correction though the website has made it very difficult. Money back or correction because you messed up please.
We are sorry if there were any fulfillment issues! Please reach out to us at support@polymaker.com with photos and order details and we can help further!
Great product. Upgrade from pla. Thanks
thank you so much polymaker this pla is great !!
Been awesome i love polymaker and all they do! Filament is slightly temperamental but is great. Tested it i. The car and no issues! Bee go to filament for me
Print like normal pla!! Not tested the high temp yet but I am sure polymaker will deliver as always
Great to work with. Prints like butter. Soo far, prints stand up to heat in the car, so great for kids toys. Guess I may have to get L colors in my inventory
.
Excelente producto, se fue a impresión directo de la caja, no hubo tiempo de secado y la impresión fue muy buena
Great filament for me. I have done some strength tests, both before and after annealing, and have been very impressed. My post annealing horizontal force test came in above ABS. Going to be using this for smaller parts until I find it's tolerances, but so far very impressed
Best filament brand there is!
Best filament brand there is!
Best filament brand there is!
Best filament brand there is!
