5-10 days
on all orders
Payments
Description
Description
PolySupport™ : support détachable fiable pour les filaments à base de PLA
Conçu pour une compatibilité parfaite avec le PLA
PolySupport™ est un matériau de support détachable spécialement conçu pour les filaments Polymaker à base de PLA. Il forme une interface solide, mais facile à retirer, avec le PLA, offrant un support robuste pendant l’impression et permettant un retrait rapide à la main, sans outils.
Retrait rapide et propre des supports
Contrairement aux supports solubles, PolySupport™ peut être retiré rapidement sans solvants ni équipement supplémentaire. Il est donc idéal pour les surplombs géométriques, les maquettes architecturales et les supports où un post-traitement efficace est important.
Polyvalent et facile à utiliser
Bien qu’optimisé pour le PLA, PolySupport™ a également reçu des retours positifs lors de son utilisation avec PolySmooth™, PolyCast™ et de petites pièces en PolyMax™ PC. Il fonctionne aussi bien sur les imprimantes à simple qu’à double extrudeur et ne nécessite ni enceinte ni matériel spécialisé.
Idéal pour des structures de support efficaces et de haute qualité
Choisissez PolySupport™ lorsque vous avez besoin d’un support fiable et facile à retirer pour vos impressions en PLA : il est parfait pour les modèles détaillés, les prototypes et les pièces fonctionnelles nécessitant un retrait propre des supports.
Exigences d’impression
Paramètres d’impression
Paramètres d’impression
Support material praised for excellent adhesion and easy removal. Customers said it "works great" with PLA for complex shapes and separates cleanly. Some noted it can be stringy and won't adhere well to topside of prints, requiring slicer adjustments. Dissolves easily. Considered pricey but effective.
I bought this to support some PLA prints with complex shapes. This worked out very well. I havent tried it on other materials yet, so I cant speak on them...but it works great on PLA.
My print was a bit messy due to user settings but it pushed through and did its job.
Used it on my modified Anet A8M. Had to print it slow, at 40mm/s and temps of 225. As you can see it worked.My first test print with this stuff was on a Gyro Sphere. It worked great. It is a bit stringy, had to use an ooze shield. But dissolved fairly easily. Not sure if the dissolved material is safe for a septic system? Stuck to the plate and held on very well, had to use a scraper to get it off.
I design complex parts with small sections an always have a great results with material. Supports come off clean and easy. The remaining layer of the part is printed clean .
This is the only support material I have used in the 4 years I have been printing. It works very well, and is easily removed after the prints are complete.
This was the first time that I had used PolySupport. It worked well.
Using on my bambu lab as support g. Works great.
I've tried this stuff with PLA and PETG on a dual extruder printer. It's great for printing rafts and supports, but will not adhere well to the topside of your printed part. Therefore, you will need to set your slicer to only generate supports from the build plate. Tree supports may help here.
Does exactly what it's supposed to do. Break cleanly away. A little pricey for something you just trash but overall I'm happy to use it.
I depend on this and print regularly with it. It separates very well, easy to print, bed adhesion is very good.I sometime print from this material alone and it has nice color and great light reflectionThe only comparable filament is 3DFuels breakaway support. It came out recently and I have yet to try.There was no other breakaway support in the market that I know of.One reviewer wrote about about the chemical composition. The material safety sheet at the company website reads that it is a mixture of Thermoplastic polyurathane and PLA.
This stuff just works. A previous post says this does not work with palette. This actually isn't the case. The issue they came across are the default settings for palette via canvas and chroma. Check your splice settings. 0-0-0 will fail.The proper setting in Canvas, Chroma, and P2PP is 6-2-8. The bond is strong enough for you to pull on.Also, rating a product low based on compatibility with a printer accessory is pretty petty. Especially when simply contacting support would have solved the issue.
