📦PER UN PERIODO LIMITATO SPEDIZIONE GRATUITA SU TUTTI GLI ORDINI

Tempo di consegna
5–10 giorni
La soddisfazione garantita
40 Giorno di ritorno
Sicuro
Pagamenti

Descrizione

Easy to Print. Flexible with a More Refined Finish.

Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.

Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.

True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.

A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.

From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.

Requisiti di stampa


LayerHub è ora online. Una piattaforma di profili per filamenti creata dalla comunità — aperta a ogni marca di filamento e a ogni stampante. Ogni profilo è accompagnato dalla foto di un oggetto realmente stampato a dimostrazione del risultato.

Impostazioni di stampa

Temperatura dell’ugello: 220–240°C
Temperatura del piano di stampa: 35°C
Ventola di raffreddamento: 100%
Velocità di stampa: 50–250 mm/s (250 mm/s è la velocità massima testata)
Retrazione (estrusore diretto): 0.8–1.2 mm
Velocità di retrazione: 30 mm/s
Camera / involucro: Non necessario
Essiccazione: 70°C per 6 ore

Polymaker™ TPU95 Matte

$25.99
SKU: PM1023040 HEX Codice: #020303
<p>Guadagna%20[points_amount]%20quando%20acquisti%20questo%20articolo.</p>

Caratteristiche principali

  • True 95A Flexibility
  • Low-Gloss Matte Finish
  • Easy to Print
  • Up to 250 mm/s Tested
Diametro
Peso
Colore

Metodi di pagamento

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Easy Printing, Refined Matte Results

Polymaker TPU95 Matte is an easy-to-print, flexible 1.75 mm TPU filament with a matte finish. 

Inizia con un profilo standard per TPU 95A

Usa il profilo standard per TPU 95A del tuo slicer come punto di partenza. Ottieni un’estrusione uniforme e una superficie pulita dedicando meno tempo alla messa a punto.

A Matte Finish You Can See and Feel

Give phone cases and other handheld accessories a clean, low-gloss finish with less visible layer lines and a lightly grippy feel.

Stampa parti flessibili fino a 250 mm/s

Progettato per un’estrusione uniforme con meno filamenti indesiderati e intasamenti, TPU95 Matte ha raggiunto 250 mm/s nei test, fino a 5× la velocità di riferimento di 50 mm/s del TPU 95A.

Flessibilità Shore 95A che recupera la forma

Stampa parti che si piegano e recuperano la forma, dai supporti per droni FPV e pneumatici RC ai piedini per mobili e agli accessori indossabili flessibili. Shore 95A bilancia la flessibilità con la consistenza necessaria per una stampa fluida e l’uso quotidiano.

15 Matte Colors, from Classics to Pastels

Scegli tra nove tonalità classiche e sei delicati colori pastello per il tuo progetto, che tu stia stampando un accessorio pratico o un oggetto decorativo giocoso.

Compatibilità con le stampanti e cura del filamento

Compatibile con la maggior parte delle stampanti FDM per filamento da 1.75 mm. Usa un portabobina esterno nelle configurazioni con AMS. Asciuga il filamento prima della stampa e conservalo in un contenitore sigillato tra un utilizzo e l’altro.

Scopri le creazioni della comunità

Consigli di stampa

  • Profile: Start with a standard 95A TPU or TPU HF profile. A direct-drive printer is generally easier to set up.
  • Build plate and cooling: Set the bed to 35°C and use 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.
  • Speed: With a 0.4 mm nozzle, use 50–250 mm/s. The upper end is the maximum tested speed. Adjust for your printer and model.
  • Direct-drive retraction: Start with 0.8–1.2 mm at 30 mm/s.
  • Drying and storage: Dry at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box while printing and during storage.
Proprietà X-Y Z Valore Metodo
Densitàg/cm³·ISO 1183 — — 1.17 g/cm³ Importanti ISO 1183
Resistenza della tensioneMPa·ISO 527 — 10.87 MPa Importanti — ISO 527
allungamento al momento della pausa%·ISO 527 — 361 % Importanti — ISO 527
Modulo di piegaturaMPa·ISO 178 69.2 MPa Importanti — — ISO 178
Temperatura di fusione°C·ISO 11357 — — 198.6 °C Importanti ISO 11357
Temperatura di transizione del vetro (Tg)°C·ISO 11357 — — -26.6 °C Importanti ISO 11357

Testato su provini con 100% infill. X-Y = nel piano degli strati, Z = tra gli strati (adesione interstrato).

Domande frequenti

Hai domande? Abbiamo le risposte. Dalla scelta del materiale giusto alla cura delle bobine, qui trovi tutto ciò che devi sapere in un unico posto.

What is Polymaker™ TPU95 Matte?

It is a general-purpose flexible TPU with a Shore hardness of 95A and a low-gloss matte finish. It works well for parts that need to flex and recover their shape, such as protective covers, grips and vibration-damping feet.

Which printer and slicer profile should I start with?

A direct-drive printer is generally easier to set up. Start with a standard 95A TPU or TPU HF profile and tune it for your printer and model.

What nozzle, bed and fan settings should I use?

With a 0.4 mm nozzle, use 220–240°C at the nozzle, 35°C on the build plate and 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.

How fast can I print TPU95 Matte?

The recommended range is 50–250 mm/s with a 0.4 mm nozzle. The upper end is the maximum tested speed. Choose a speed that suits your printer, settings and model geometry.

What retraction settings should I use?

For direct drive, start with a retraction distance of 0.8–1.2 mm at 30 mm/s.

How should I dry and store TPU95 Matte?

Dry the filament at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box to keep it dry while printing and during storage.

Recensioni

Polymaker

Polymaker™ TPU95 Matte

$25.99 USD

Easy to Print. Flexible with a More Refined Finish.

Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.

Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.

True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.

A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.

From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.

Diametro

  • 1.75mm

Peso

  • 1kg

Colore

  • Matte Negro
  • Matte Bianco
  • Matte Blu di ghiaccio
  • Matte Giallo di savana
  • Matte Blu
  • Matte Bruno
  • Matte Purpuro
  • Matte Lavanda morbida
  • Matte Bruno leggero
  • Matte Dusty Pink
  • Matte Matcha Green
  • Matte Grigio freddo
  • Matte Rossa
  • Matte Verde
  • Matte Arancione
Visualizza prodotto
$25.99