5-10 days
Payments
Beschreibung
Beschreibung
Fiberon™ PA6-GF25: Hochleistungsfilament aus glasfaserverstärktem Nylon 6 (früher PolyMide™ PA6-GF)
Außergewöhnliche Festigkeit, Steifigkeit und Hitzebeständigkeit
Fiberon™ PA6-GF25 ist ein glasfaserverstärktes PA6-Filament (Nylon 6) mit 25 Gew.-% Glasfaseranteil. Dieser hochentwickelte Verbundwerkstoff liefert herausragende mechanische Festigkeit, hohe Steifigkeit und exzellente thermische Eigenschaften und eignet sich damit ideal für anspruchsvolle Anwendungen in Engineering, Automotive, Luft- und Raumfahrt sowie Industrie.
Wichtigste Merkmale
- 25 % Glasfaserverstärkung: Erhöht Steifigkeit, Festigkeit und Formstabilität deutlich.
- Exzellente thermische Eigenschaften: Hält hohen Temperaturen stand, die Wärmeformbeständigkeit (HDT) liegt nach dem Tempern bei bis zu 191 °C.
- Herausragende Schichthaftung: Sorgt für eine feste Verbindung zwischen den Schichten und damit für langlebige, stabile Drucke.
- Minimaler Verzug: Die Warp-Free™ Technologie ermöglicht das Drucken bei niedrigeren Betttemperaturen (40-50 °C), senkt das Verzugsrisiko und verbessert die Maßhaltigkeit.
- High-Speed-Druck: Kompatibel mit Druckgeschwindigkeiten von bis zu 300 mm/s.
Einfach in der Anwendung, für erfahrene Nutzer
Fiberon™ PA6-GF25 benötigt keine beheizte Kammer und lässt sich auf leistungsstarken FDM-/FFF-3D-Druckern zuverlässig verarbeiten, sofern eine gehärtete Stahldüse verwendet wird, Glasfasern wirken abrasiv. Für optimale Ergebnisse werden das Trocknen des Filaments vor dem Druck und das Tempern nach dem Druck (100 °C für 10-16 Stunden) dringend empfohlen, um die mechanischen und thermischen Eigenschaften voll auszuschöpfen.
Dieselbe bewährte Rezeptur, neuer Name
Fiberon™ PA6-GF25 ist dasselbe leistungsstarke Material wie PolyMide™ PA6-GF, jetzt unter der Marke Fiberon™.
Setz auf Fiberon™ PA6-GF25, wenn deine Anwendung maximale Festigkeit, Steifigkeit und Hitzebeständigkeit verlangt, ohne Abstriche bei Druckbarkeit und Schichthaftung.
Früher PolyMide PA6-GF genannt.
Druckanforderungen
Druckeinstellungen
Druckeinstellungen
Fiberon™ PA6-GF25
- High Strength & Stiffness
- High Heat Resistance
- Highest Layer Adhesion
- Warp-Free™ Technology ：
- High-Speed Printing
- Ready to Print
Fiberon™ PA6-GF25 - Grey / 0,5 kg ist nachbestellt und wird versendet, sobald es wieder auf Lager ist.
Technische Daten
Alles, was du vor dem Druck wissen musst
- Use a wear-resistant nozzle, such as hardened steel or ruby, because the glass-fiber reinforcement is abrasive.
- Store and print under dry conditions (relative humidity below 20%); dry at 100°C for 10 hours before use.
- Use a 40-50°C build plate, and turn the cooling fan OFF; an actively heated chamber is not required.
- Use glue stick or Magigoo PA if bed adhesion is weak.
- If the material is used as its own support, remove the support before excessive moisture absorption to avoid permanent bonding.
- Anneal at 100°C for 16 hours when the annealed performance stated in the TDS is required.
| Property | X-Y | Z | Value | Method |
|---|---|---|---|---|
| Density | — | — | 1.2 g/cm³ Important | ISO 1183 |
| Tensile strength | 80.1 MPa Important | 60.7 MPa Important | — | ISO 527 |
| Elongation at break | 2.4 % Important | 4 % Important | — | ISO 527 |
| Bending strength | 133.8 MPa Important | 99.9 MPa Important | — | ISO 178 |
| Bending modulus | 4314.2 MPa Important | — | — | ISO 178 |
| Young's modulus | 5356.9 MPa Important | 3375.9 MPa Important | — | ISO 527 |
| Charpy, unnotched | — | 16.2 KJ/m² Important | — | ISO 179 |
| Charpy, notched | 10 KJ/m² Important | — | — | ISO 179 |
| Melting temperature | — | — | 214.5 °C Important | ISO 11357 |
| Glass transition temperature (Tg) | — | — | 70.4 °C Important | ISO 11357 |
| Vicat softening temperature | — | — | 211.7 °C Important | ISO 306 |
Getestet an Prüfkörpern mit 100 % Infill. X-Y = quer zu den Schichten, Z = zwischen den Schichten (Schichthaftung).
Häufige Fragen
Du hast Fragen? Wir haben die Antworten. Von der Materialwahl bis zur Pflege deiner Spulen - hier findest du alles Wichtige an einem Ort.
What is annealing?
What is moisture conditioning?
Should I anneal before or after moisture conditioning?
Why do you use such a low build plate temperature with your nylons?
Will the spools work in an AMS?
Can you offer 1KG Fiberon™ Spool Options?
Customers praised this PA6-GF25 filament for "great layer adhesion" and producing "strong, durable" parts. Many noted it "prints smoothly" and "like butter," with minimal warping. Reviewers loved the quality for automotive and engineering applications. Some mentioned learning curves with temperature settings and one desired more color options.
Love this stuff. Great layer adhesion. Durable, strong, beautiful to print.
I personally use from automotive and 3d2a. You cannot beat polymaker's quality.
4/5 due to it not being available in OD green. Review could change if OD becomes available.
Polymaker is Awesome
Fiberon PA6-GF25 is amazing
Best PA6-GF I have used.
I've used and tested with many brands of this type of material and this is without a doubt the best to print with and produces the highest quality parts. No warping, no heated chamber, no stress. I never have to fear for this stuff warping.
Once I figured out the nuances to printing it without warping it worked great. Strong material and I am getting a good finish. Annealing seems to be more important than I thought originally.
UPDATE: When I initially wrote this review, I was having some troubles with the material clogging my hot end. As it turns out, I was having thermistor issues that was causing my printer to get a false positive overheat and shutting down, causing the partially melted - but still extruding - material to create clogs.With that issue out of the way, the material now prints correctly and I'm getting some very, very positive results and only one minor drawback.So far, the only real drawback is on complex parts (with internals and externals) there seems to be small little build ups of 'cruddies' at various points on the models. This means lots of clean up work on the final print. I am using their recommended extrusion and retraction settings.Overall, Polymaker's customer support has been - thus far - exemplary. I've sent them pictures of the existing issue and my printer and print settings, now I am waiting on their next response.As far as the material itself, it has really great properties and is one of the most durable I've seen for 3D Printers to date. I'm looking forward to seeing whether or not it can by dyed to something other than this weird gray color.
Came well packaged,prints smooothh
Came well packaged, and prints beautifully.
Favorite filament
Prints flawlessly on my H2D. I love Polymaker.
Made items that were threaded 1.65” diameter with a thru hole of 1” and length of 3”. Had to tweak the model to get the O.D. Perfect but this stuff prints like butter. Printed using a tungsten carbide nozzle at 290 degrees Celsius. Was able to print four pieces at a time with zero issues. Each .5kg role made 12 parts. Parts are strong and can handle impact. These were never annealed after the print process was completed.
A great choice for general prototypes. I’ve been using this for lightweight brackets and electronic enclosures without any problems. Compared to Fiberon’s PA6-CF20, the GF variant is less brittle and easier to work with, but the CF variant prints a bit sharper.
I bought my 3kg spool from their website, but it was shipped through Amazon. My box was pretty beat up, but they included a internal cardboard shell to help protect the spool, it mostly did the job, but i did have a bend on one section of the spool. I wish their packaging was more robust for the 3kg spools, especially if Amazon is tossing their boxes around.
Great filament for all round strength
Wonderful got what I needed
It is an excellent engineering material for high impact components! Just make sure to print at higher temps to ensure layer adhesion
Prints like pla + love it!
Hello,
I read this filament have an UL class HB. Have you also an E-file number for this product?
No - I am sorry but PA6-GF has not been tested for flame retardancy. For Flame Retardancy we would suggest Fiberon PPS-GF or PPS-CF. Thanks!
