5-10 days
Payments
Beschreibung
Beschreibung
Hitzebereit. Schlagfest. Immer noch PLA
Polymaker™ HT-PLA Pro ist ein robustes PLA für Funktionsteile, die im realen Einsatz eine höhere Haltbarkeit benötigen. Es lässt sich genauso einfach wie Standard-PLA drucken und behält in warmen Umgebungen ohne Belastung seine Form. Es wurde für Maker, Ingenieure und Druckfarmen entwickelt, die echte Haltbarkeit ohne zusätzliche Druckkomplexität benötigen.
Direkt nach dem Druck bis zu 150 °C ohne Durchhängen
Polymaker™ HT-PLA Pro wurde entwickelt, um in wärmeexponierten Umgebungen ohne Belastung seine Form zu behalten. Die Vicat-Erweichungstemperatur erreicht direkt nach dem Druck 148.3 °C und nach dem Tempern 150.5 °C, getestet ohne Belastung. Für Anwendungen, die Hitzebeständigkeit unter Belastung erfordern, ist Tempern notwendig. Ein 30-minütiges Tempern bei 100 °C erhöht die Wärmeformbeständigkeit (HDT @ 0.45 MPa) von 56.3 °C auf 107.6 °C. Dadurch eignet es sich besser für Anwendungen in warmen Umgebungen, etwa an sonnenbeschienenen Fensterbänken oder für Teile in der Nähe wärmeabstrahlender Maschinen.
2x höhere PLA-Haltbarkeit
HT-PLA Pro behält seine starken thermischen Eigenschaften bei und verbessert gleichzeitig die mechanische Leistung. Im Vergleich zu normalem HT-PLA bietet es eine um mehr als 2x höhere Schlagfestigkeit (9.94 kJ/m² gegenüber 4.94 kJ/m²) und eine um 30% höhere Haftung zwischen den Schichten auf der Z-Achse (26.8 MPa gegenüber 20.8 MPa). Dadurch widerstehen gedruckte Teile Stößen und dem Aufsplittern entlang der Schichtlinien besser.
Druckt mit PLA-Einstellungen
Im Gegensatz zu vielen Hochtemperatur-Filamenten wird HT-PLA Pro mit den Standardeinstellungen für PLA gedruckt. Es läuft auf den meisten Standard-FDM-Druckern, ohne Gehäuse, spezielles Hotend oder komplexe Abstimmung. Mit Druckgeschwindigkeiten von bis zu 300 mm/s lässt es sich mit minimalen Änderungen in bestehende Produktionsabläufe integrieren.
Bitte beachten: Für Hitzebeständigkeit unter Belastung ist Tempern erforderlich
Klicken Sie auf den Link, um die Empfehlungen zum Tempern anzuzeigen
Druckanforderungen
Druckeinstellungen
Druckeinstellungen
Polymaker™ HT-PLA Pro
Polymaker™ HT-PLA Pro - Black / 1 kg ist nachbestellt und wird versendet, sobald es wieder auf Lager ist.
Technische Daten
Alles, was Sie brauchen, bevor Sie auf „Drucken“ klicken
| Property | X-Y | Z | Value | Method |
|---|---|---|---|---|
| Tensile strength | 37.6 MPa Important | 26.8 MPa Important | — | ISO 527 |
| Elongation at break | 13 % Important | 2.6 % Important | — | ISO 527 |
| Bending strength | 60.1 MPa Important | 37.1 MPa Important | — | ISO 178 |
| Bending modulus | 2.21 MPa Important | 1.91 MPa Important | — | ISO 178 |
| Young's modulus | 2.27 MPa Important | 1.85 MPa Important | — | ISO 527 |
| Charpy, unnotched | 45.7 KJ/m² Important | 10.3 KJ/m² Important | — | ISO 179 |
| Charpy, notched | 9.94 KJ/m² Important | — | — | ISO 179 |
| Melting temperature | — | — | 173.35 °C Important | ISO 11357 |
| Glass transition temperature (Tg) | — | — | 59.15 °C Important | ISO 11357 |
| Vicat softening temperature | — | — | 148.3 °C Important | ISO 306 |
| HDT (0.45 MPa) | — | — | 56.3 °C Important | ISO 75 |
| HDT (1.8 MPa) | — | — | 53.8 °C Important | ISO 75 |
Getestet an Prüfkörpern mit 100 % Füllung. X-Y = quer zu den Schichten, Z = zwischen den Schichten (Schichthaftung).
Häufig gestellte Fragen
Fragen? Wir haben die Antworten. Von der Auswahl des richtigen Materials bis zur Pflege deiner Spulen findest du hier alles, was du wissen musst, an einem Ort.
Braucht es wirklich keine Abdeckung?
Ist es schlimmer als HT-PLA?
Ist es UV-resistent?
Ist der Oberflächenfinish matte?
Kann ich es annullieren?
Reviews
Customers praised this heat-resistant filament for exceptional print quality and ease of use. Many noted it "prints beautifully" with smooth finishes and strong parts. Shoppers appreciated the heat resistance for car-safe items and vibrant color options, especially burnt orange. Some mentioned settings need tweaking, and one reported a color shipping error.
I have purchased a few spools of HT-PLA Pro and honestly, I don't want to use anything else. This stuff prints beautifully with fully calibrated and its incredibly resilient. I've had it in a desiccant pod for my AMS HT while drying out some filament and it had no warping. The blue is a great color too. 10/10 would and will buy again.
Using for RC Planes and is strong! Also printing one wall quite light.
This material was perfect for when you just need a little something more than normal PLA. I had a friend who needed a part for his son's toy and it needed to be subject to some playful forces. As a result, I reached for some HT-PLA Pro and it turned out amazingly!
Works well, layer strength is improved. stands up to heat very well. The Pro can be annealed to keep its shape when put in the sun. Using this for most of my prints and now. Oh, and it prints great with PLA settings!
Printed great, best pla print ive had so far. I don't wish the purple was more blueish, comes out pretty red leaning
I dried the package for the recommended time before printing. I loaded up the settings for my P1S I downloaded directly from the Polymaker site. I have about 5 longer prints on this and the results are nice. The settings need to be tweaked for perfection but so far so good.
Im 65percent through a 40 hour print , and I have to say that this ht-pla pro print great so far. Printing at 230 degrees, fans at 40 percent, and slow speed. Haven't had any warping , or problems. I cant wait to get some different colors so I can do some more prints with it.
This prints up really nice. Still trying to get it to deform in the car. Will buy again.
Picked up a roll of black, dark gray, and burnt orange for some planned projects. Used the PolyMaker print profile for my K2 Pro and this stuff prints beautifully.
The Burnt Orange has to be my favorite shade of orange filament I have used so far. And the Dark Gray contrasts it quite nicely for 2 tone projects.
Got it for the Beard, jkjk
Excellent color
wonderful printing
Super terrific filament. This filament prints beautifully and has a wonderful smooth finish. Parts printed are super strong and hard. I tried the blue and the yellow so far and they are both terrific!
Love this stuff! It’s better than PLA Pro.
prints just like PLA this stuff is great!!!!!!!!!!
Great filament, just takes some tuning. But it will figure itself out.
I had seen an early review video on HT-PLA Pro and felt like I had the perfect project to try it out - a simple lid for my wife's facial wax heater. The things run quite hot to keep the wax at temperature but I wanted a lid to cover the molten wax for safety reasons. A temperature resistant material was called for.
I won't bore you too much with the design - think hemisphere with a large void under the dome where the wax container sits. Being that it had a curved top, I decided to print it right-side-up, which meant having a lot of support for the large void area.
I loaded up the HT-PLA Pro on my Bambu A1 Mini, modified a Polylite PLA profile to increase the nozzle temp a bit (per the box instructions) and set it to printing.
The result was flawless and all that support came out in one block with a slight tug with plyers, leaving a very smooth interior. All of the surface areas were excellent and after several days of use my wife is very pleased with it and there are zero artifacts or any sort of warping.
It is a big deal when you order Pink and they give you 2 Purple rolls. Now I won't be able to make an item for a client and lost business! I truly doubt Polymaker will make this right, seems another reviewer got Purple instead of Pink. Definitely a quality control issue!
Also Fake 5 star reviews from L.H. 3 reviews try to boost ratings
We are very sorry about this! There was an initial issue of our SKU syncing wrong but that has been fixed and we are happy to replace with no return needed! Just reach out to support@polymaker.com and we can get that handled for you.
As for fake reviews - we certainly are not making any reviews! I see the 3 duplicate reviews now and will remove two of them.
EDIT: Well looks like I am unable to remove verified reviews from customers even when they seem to be duplicates like this - I am sending to web team to investigate.
This review is mainly here to balance out the silly person who gave a new product a 1 star review because polymaker mixed up purple and pink, oh the horror.
My first order of 10 rolls showed up perfectly and my first print in HT-PLA-Pro also printed perfectly. It is a high impact object where previous HT-PLA’s have not worked well because of layer adhesion issues. Only time will tell, but so far so good.
I’ll be leaving this test print in my hot car to watch for warping. If this review is still at 5 stars, assume everything has worked out well.
I printed the obligatory Benchy and a couple other items to test. This prints flawlessly right out of the box. I used the Polymaker HT PLA Pro profile settings for my printer. I am looking forward to doing more with PLA that I don’t need to worry about getting too hot or leaving it in the car.
I’m missing the roll of pink ht pla pro, you have sent a purple in its place. I would like to request a correction though the website has made it very difficult. Money back or correction because you messed up please.
We are sorry if there were any fulfillment issues! Please reach out to us at support@polymaker.com with photos and order details and we can help further!
Prints perfect. Has somewhat of a matte finish, which I like. The orange color could be a little more vibrant, but I'm still happy with it
Love it, my go-to purchase for pla from now on
