📦NUR FÜR KURZE ZEIT KOSTENLOSER VERSAND FÜR ALLE BESTELLUNGEN

Black Friday Sale

Bis zu 50% sparen + ein kostenloses Überraschungsgeschenk bei qualifizierenden Bestellungen.

Jetzt entdecken

Polycarbonat Kollektion


  • PolyLite™ PC

  • Ausverkauft

    Polymaker PC-ABS

  • PolyMax™ PC

Polycarbonate hat viele Anwendungen engineering

Wärme- und Feuerbeständigkeit

Polycarbonat kann ein schwierig zu druckendes Material sein, aber wenn Sie es richtig drucken können, bietet es eine hervorragende Hitzebeständigkeit und Festigkeit und kann sogar feuerbeständig sein.

HitzebeständigkeitFeuerbeständigkeitEngineering

FAQ zu Polycarbonat

Was ist Polycarbonat-Filament?

Polycarbonate filament is an engineering-grade material used for strong, stiff, and heat-resistant FDM/FFF parts. Commonly abbreviated as polycarbonate (PC), it is suitable for functional components that may experience mechanical loads or elevated temperatures.Compared with general-purpose 3D printing filament, polycarbonate 3D printing filament requires higher nozzle, bed, and chamber temperatures, as well as stricter moisture control.

Wofür wird Polycarbonat-Filament verwendet?

Polycarbonate for 3D printing is commonly used for functional prototypes, tooling, fixtures, brackets, protective housings, heat-exposed components, and mechanical parts. Translucent formulations can also be used for light-diffusing covers and illuminated components.The application depends on the formulation. For an impact-resistant polycarbonate part, PolyMax PC is more appropriate than PolyLite PC, which is designed primarily for stiffness, heat resistance, and light diffusion rather than high-impact engineering applications.

Ist Polycarbonat-Filament belastbarer als PLA oder ABS?

Not in every property. “Strength” can refer to tensile strength, stiffness, impact resistance, layer adhesion, or performance at elevated temperatures.PC filament is generally selected when heat resistance and toughness are more important than easy printing. PLA filament is usually stiffer and easier to print but is less suitable for elevated-temperature applications. ABS filament offers good toughness and heat resistance with less demanding hardware than many PC formulations.The specific polycarbonate 3D filament should therefore be selected from its TDS properties rather than assuming every PC formulation is stronger than every PLA or ABS product.

Wie wähle ich zwischen PolyLite PC, PolyMax PC, PC-ABS und PC-FR?

Choose the formulation according to the required mechanical, thermal, optical, and flame-retardant properties:

  • PolyLite PC provides high stiffness, heat resistance, translucency, and light diffusion. It is not the preferred option for high-impact engineering parts.
  • PolyMax PC balances strength, toughness, heat resistance, and print quality for general engineering applications.
  • Polymaker PC-ABS combines PC and ABS to provide toughness, heat resistance, good surface quality, and compatibility with metal plating.
  • PolyMax PC-FR is a flame-retardant formulation reported to achieve UL94 V-0 performance under the specified test conditions.

A material-level UL94 result does not automatically certify every printed component. Parts used in regulated or safety-critical applications may require separate testing in their final geometry and printing configuration.

Benötigt Polycarbonat-Filament einen 3D-Drucker mit geschlossenem oder beheiztem Bauraum?

Yes. All four Polymaker PC products require an enclosure that retains heat, but their chamber requirements differ:

  • PolyLite PC: An enclosure is required, and an actively heated chamber is highly recommended. Large or dense parts require stronger chamber-temperature control.
  • PolyMax PC: An enclosure is required, and an actively heated chamber of at least 70°C is highly recommended.
  • Polymaker PC-ABS: An actively heated chamber capable of maintaining at least 90°C is required.
  • PolyMax PC-FR: Its product page requires an actively heated chamber capable of maintaining at least 90°C.

Successful polycarbonate 3D printing also requires an all-metal hotend rated for continuous operation throughout the specified 250–270°C nozzle range. A basic open-frame printer is not suitable for these products.

Welche Druckeinstellungen sollte ich für Polymaker Polycarbonat-Filament verwenden?

Polymaker’s current downloadable TDS documents list the following settings, based on a 0.4 mm nozzle:

  • Nozzle temperature: 250–270°C for all four products
  • Bed temperature: 90–105°C for all four products
  • Cooling fan: Off
  • PolyLite PC speed: 50–200 mm/s
  • PolyMax PC speed: 50–200 mm/s
  • Polymaker PC-ABS speed: 50–250 mm/s
  • PolyMax PC-FR speed: 50–200 mm/s
  • Retraction distance: 1–3 mm
  • Retraction speed: 20–40 mm/s

These are the speed ranges listed in the current TDS documents, not recommended starting speeds for every printer. Begin at 50 mm/s and increase only after confirming stable extrusion, layer adhesion, chamber temperature, and dimensional accuracy.

Muss Polycarbonat-Filament vor dem Drucken getrocknet werden?

Polycarbonate filament absorbs moisture and should be dried after humidity exposure or when it produces bubbles, popping sounds, excessive stringing, rough surfaces, or reduced layer strength. The current Polymaker TDS documents specify 75°C for six hours for PolyLite PC, PolyMax PC, PC-ABS, and PC-FR.After drying, keep the spool in a sealed dry box during storage. Printing directly from a dry box is also advisable for long prints or humid environments.

Wie kann ich Verzug oder Schichtablösung beim Drucken mit Polycarbonat-Filament verhindern?

Keep the material dry, use the required enclosure or heated chamber, maintain a 90–105°C bed, and leave the cooling fan off. The chamber should remain closed throughout the print so the part cools slowly and evenly.For better bed adhesion, use a clean textured PEI surface with glue when needed or a PC-specific adhesive such as Magigoo PC. A brim can help with large footprints. Anneal the completed polycarbonate 3D filament part immediately after printing to relieve residual stress and reduce delayed layer cracking.

Müssen Drucke aus Polycarbonat-Filament nach dem Drucken getempert werden?

Polymaker recommends annealing PolyLite PC, PolyMax PC, PC-ABS, and PC-FR immediately after printing to release residual internal stress. There are two ways to complete the process:

  • Heated-chamber method: If the printer chamber can maintain 90°C, keep the completed part in the chamber at 90°C for two hours. Then allow the chamber and part to cool slowly to room temperature.
  • Oven method: Preheat a temperature-controlled oven to 90°C before the print finishes. Transfer the part directly to the oven, hold it at 90°C for two hours, and then allow the oven and part to cool slowly to room temperature.

If the part cannot be removed safely from the hot build plate, it may need to be transferred with the plate. Annealing can cause dimensional changes or distortion, so test the process before treating a dimensionally critical polycarbonate part.

Kann Polymaker Polycarbonat-Filament mit einem AMS verwendet werden?

The Polymaker spools are mechanically compatible with an AMS, but material and printer compatibility must be checked separately.The printer must still provide a 250–270°C all-metal hotend, a 90–105°C bed, and the enclosure or actively heated chamber required by the selected polycarbonate 3D printer filament. PC-ABS and PC-FR require a chamber temperature of at least 90°C, which many desktop printers cannot maintain. The filament should also be dried before loading, and the exact material must be supported by the printer and automatic material system manufacturer.