📦NUR FÜR KURZE ZEIT KOSTENLOSER VERSAND FÜR ALLE BESTELLUNGEN

Lieferzeit
5–10 Tage
Zufriedenheit garantiert
40 Tage Rückgaberecht
Sichere
Zahlungen

Beschreibung

Easy to print, hard to break
Polymaker™ G-Flex PETG is a highly durable, elastic PETG that combines PETG’s printing ease and shape retention with TPU’s elasticity and impact absorption. Designed for everyday creations and long-term use, it brings toughness, fine detail, and added flexibility to functional parts, articulated models, props, cosplay accessories, and RC or drone parts.

Impact-tough durability for repeated use
From accidental drops to bending, assembly, and transport, G-Flex PETG helps prints withstand the demands of real-world use. Its elasticity and impact absorption make it a durable choice for parts that need more toughness than PLA. In ISO 179-1 unnotched Charpy impact testing, all tested specimens recorded “No Break” in both XY and Z orientations under the test conditions.

PETG-like printing ease, fine details included
G-Flex PETG makes tough, elastic prints accessible to users familiar with PLA and PETG. It retains defined shapes, fine features, and complex geometry, making it well suited for moving joints, intricate models, and snap-fit assemblies.
Recommended settings and common printer presets provide a straightforward starting point. With print speeds up to 300 mm/s and volumetric flow up to 24 mm³/s, it supports efficient printing when speed and flow are configured together.

Safety from printing to handling
G-Flex PETG offers VOC-certified low-emission printing and complies with EN 71-3 (toy safety) for migration of certain elements. Its resistance to brittle breakage helps reduce sharp fragments during handling and support removal.

Bright colors for fun and functional prints
Bring your ideas to life with 6 colors. From expressive models and colorful props to practical everyday parts, the palette gives you more room to create. Compatibility with Bambu AMS, AMS 2 Pro, and Creality CFS, using the recommended settings, supports multicolor projects.

Druckanforderungen

Use an FDM printer capable of a 230–240°C nozzle temperature and a 70°C heated bed. A PEI build surface without glue is recommended. Start with the recommended preset for your printer and adjust settings to suit your setup. Use G-Flex PETG or PLA as support material.Each spool contains 1 kg of 1.75 mm filament, factory-dried and vacuum-sealed for printing straight from the bag. Reseal with desiccant after use. If moisture-related stringing appears, dry at 70°C for at least 6 hours before printing again.


LayerHub ist jetzt online. Eine von der Community aufgebaute Plattform für Filamentvoreinstellungen — offen für jede Filamentmarke und jeden Drucker. Jede Voreinstellung enthält als Nachweis ein Foto eines tatsächlich gedruckten Objekts.

Druckeinstellungen

  • Printing Temperature: 230°C - 240°C
  • Bed Temperature: 70°C
  • Nozzle Type: Use a standard nozzle. High-flow nozzles are not recommended, as they may reduce interlayer toughness.
  • Build Surface: PEI; no glue required. Do not use cryo/cold-print build plates such as BIQU CryoGrip.
  • Printing Speed: Up to 300 mm/s
  • Maximum Volumetric Flow: Up to 24 mm³/s
  • Fan: 0% - 90%
  • Flow Ratio: 1.00 - 1.02
  • Support Material: G-Flex PETG or PLA
  • Multi-Material System Compatibility: Bambu AMS, AMS 2 Pro, and Creality CFS; use recommended settings.
  • Drying Settings: Oven: 70°C for at least 6 hours.

(Only if the material has absorbed moisture. Factory-dried and vacuum-sealed; ready to print from the bag.)

  • Storage: Reseal with desiccant after use.

Can't find your profiles? Check out our official presets at presets.polymaker.com.

Polymaker™ G-Flex PETG

$21.99
1.75mm Artikelnummer: PM1022069 HEX-Code: #F0EFEA
<p>Sammle%20[points_amount],%20wenn%20du%20diesen%20Artikel%20kaufst.</p>

Hauptmerkmale

  • Hard to Break
  • Easy Printing
  • Fine Detail
  • Low-Emission Printing
Durchmesser
Gewicht
Farbe: Weiß

Zahlungsmethoden

  • American Express
  • Apple Pay
  • Bizum
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Einfach zu drucken, schwer zu zerbrechen

Polymaker™ G-Flex PETG ist ein elastisches PETG-Filament, das einfaches Drucken und feine Details mit der nötigen Zähigkeit für Stürze, Biegungen und wiederholten Gebrauch verbindet.

Druckt sich wie PETG, absorbiert Stöße wie TPU

G-Flex PETG verbindet die einfache Druckbarkeit und Formstabilität von PETG mit der Stoßabsorption von TPU. Es gibt stärker nach als Standard-PETG, behält seine Form aber besser als weiches TPU und eignet sich daher gut für detailreiche Teile, die sich biegen müssen.

Gemacht, um Stöße auszuhalten

G-Flex PETG gibt nach, um Stöße zu absorbieren, und hilft gedruckten Teilen, versehentlichen Stürzen und alltäglichen Stößen standzuhalten.

Komplexe Drucke, außergewöhnliche Details

Von dünnen Gliedmaßen beweglicher Figuren bis zu komplexen Oberflächenstrukturen bewahrt G-Flex PETG die Details, die ein Design zum Leben erwecken.

Sicherheit vom Drucken bis zur Handhabung

G-Flex PETG ist unter den geprüften Druckbedingungen für niedrige VOC-Emissionen zertifiziert und erfüllt die Anforderungen der EN 71-3 hinsichtlich der Migration bestimmter Elemente.

Für wiederholtes Biegen entwickelt

Drucken Sie snap-fit-Verbindungen, Clips und flexible Teile, die sich bei der Montage biegen und im Gebrauch ihre Form behalten. G-Flex PETG gibt beweglichen Teilen die nötige Flexibilität für wiederholte Montage, Anpassung und Handhabung.

Gemacht für Dinge, die Sie benutzen

Drucken Sie schützende RC-Teile für Geländefahrten, bewegliche Figuren für wiederholte Handhabung und cosplay-Zubehör, das sich bei Ihren Bewegungen mitbiegt.

In sechs Farben erhältlich

Wählen Sie zwischen kräftigen Farbtönen und vielseitigen neutralen Farben. Weitere Farben sind bald erhältlich!

Entdecken Sie die Projekte der Community

Drucktipps

  • Preset: Start with the official G-Flex preset for your printer and slicer. Use a standard 0.4 mm nozzle as the starting point.
  • Build plate: Set the bed to 70°C and use a PEI surface without glue. Avoid cold-print plates such as BIQU CryoGrip.
  • Speed and flow: Set print speed and volumetric flow together. Use up to 300 mm/s and up to 24 mm³/s.
  • Cooling and retraction: Use 0–90% cooling. For direct-drive extruders, start with 1.0 mm retraction at 30 mm/s.
  • Drying and storage: Print straight from a freshly opened bag and reseal the spool with desiccant after use. If moisture causes stringing, dry with PolyDryer Level 3 for 24 hours, AMS 2 Pro at 65°C for 24 hours, or an oven at 70°C for at least 6 hours.
Eigenschaft X-Y Z Wert Prüfmethode
Dichteg/cm³·ISO 1183 — — 1.25 g/cm³ Wichtig ISO 1183
ZugfestigkeitMPa·ISO 527 40.27 MPa Wichtig 18.49 MPa Wichtig — ISO 527
Bruchdehnung%·ISO 527 306.53 % Wichtig 104.82 % Wichtig — ISO 527
BiegefestigkeitMPa·ISO 178 13.96 MPa Wichtig 10.61 MPa Wichtig — ISO 178
BiegemodulMPa·ISO 178 451.55 MPa Wichtig 350.29 MPa Wichtig — ISO 178
ElastizitätsmodulMPa·ISO 527 431.49 MPa Wichtig 330.7 MPa Wichtig — ISO 527
Charpy-Schlagzähigkeit, ungekerbtISO 179 No Break Wichtig No Break Wichtig — ISO 179
Glasübergangstemperatur (Tg)°C·ISO 11357 — — 63.8 °C Wichtig ISO 11357
Vicat-Erweichungstemperatur°C·ISO 306 — — 89.9 °C Wichtig ISO 306
HDT (0.45 MPa)°C·ISO 75 — — 61.5 °C Wichtig ISO 75
HDT (1.8 MPa)°C·ISO 75 — — 46.7 °C Wichtig ISO 75

Getestet an Probekörpern mit 100% infill. X-Y = in der Schichtebene, Z = zwischen den Schichten (Schichthaftung).

Häufig gestellte Fragen

Haben Sie Fragen? Wir haben Antworten. Von der Wahl des richtigen Materials bis zur Pflege Ihrer Spulen finden Sie hier alles Wissenswerte an einem Ort.

Was ist G-Flex PETG?

Es handelt sich um ein elastisches, schlagzähes PETG, das sich genauso einfach wie herkömmliches PETG drucken lässt. Es gibt nach und absorbiert Stöße, statt zu brechen. Dadurch widerstehen die Teile Stürzen, Biegungen und der alltäglichen Handhabung.

Warum ist es schwer zu brechen?

Elasticity and impact absorption improve the durability of printed parts. All tested specimens recorded No Break in XY and Z unnotched Charpy impact testing under ISO 179-1. How a finished part holds up still depends on its design, wall thickness, print orientation and settings.

Wie unterscheidet es sich von herkömmlichem PETG und weichem TPU?

It adds elasticity and impact absorption to PETG-like printing ease and shape retention. Compared with soft TPU, it retains defined structures and fine detail for complex, articulated objects that need to hold their shape.

Mit welchem Druckprofil sollte ich beginnen?

Use the G-Flex preset for your printer on presets.polymaker.com. If there is none yet, start from Bambu PLA Silk (Bambu Lab), Elegoo PLA Silk (Elegoo), Generic PLA (Creality and Snapmaker), Generic PLA Silk (Prusa) or Anycubic PLA-CF (Anycubic).

Muss es vor dem Drucken getrocknet werden?

Not at first. Every spool is dried and vacuum-sealed at the factory, so you can print straight from the bag. Reseal it with the desiccant after use. If you see stringing, dry it: PolyDryer Level 3 for 24 hours, AMS 2 Pro at 65°C for 24 hours, or an oven at 70°C for at least 6 hours.

Wie sollte ich es nach Gebrauch lagern?

Reseal the spool with desiccant to reduce moisture absorption. If moisture-related stringing appears when printing again, dry the material before continuing.

Kann ich ein Mehrfarbsystem verwenden?

Yes. It is compatible with multicolour systems such as Bambu AMS, AMS 2 Pro and Creality CFS.

What nozzle, bed and speed settings should I use?

Verwenden Sie eine Düse bei 230–240°C, eine Betttemperatur von 70°C und eine PEI-Oberfläche ohne Klebstoff. High-flow-Düsen werden nicht empfohlen, da sie die Zähigkeit zwischen den Schichten verringern können. Verwenden Sie keine Cryo-Druckplatten (für den Kaltdruck), wie etwa BIQU CryoGrip. Die Druckgeschwindigkeit beträgt bis zu 300 mm/s und der Volumenstrom bis zu 24 mm³/s. Stellen Sie Geschwindigkeit und Volumenstrom gemeinsam ein.

Bewertungen

  • 5 stars: 0 (0%)
  • 4 stars: 2 (100%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
g
gorgon
double the price in Japan, how unusual.

and, of course, it's $25 in Japan.

D
Dale S.
This review is based on expected outcome

This review is based on expected outcomes the store is sold out of every colour, however some if the instructions; namely drying contradicts the TDS.

The 70 °C drying figure is above the 63.8 °C Tg and the 61.5 °C HDT, so Polymaker's own sheet contradicts itself. Nothing in the TDS explains it

While the recommended drying temperature of 70°C is above the Tg (63.8°C) and HDT (61.5°C), these values measure different material properties.

Tg is the temperature at which the material starts to become more flexible, rather than melt. HDT measures deformation under a specific mechanical load, which differs from normal drying conditions.

Drying at 70°C helps remove moisture more efficiently while remaining below the material’s Vicat softening temperature (89.9°C).

We appreciate your observation and agree that this could be better explained in our documentation. We hope this clarifies the apparent contradiction!

Polymaker

Polymaker™ G-Flex PETG

$21.99 USD
Easy to print, hard to break
Polymaker™ G-Flex PETG is a highly durable, elastic PETG that combines PETG’s printing ease and shape retention with TPU’s elasticity and impact absorption. Designed for everyday creations and long-term use, it brings toughness, fine detail, and added flexibility to functional parts, articulated models, props, cosplay accessories, and RC or drone parts.

Impact-tough durability for repeated use
From accidental drops to bending, assembly, and transport, G-Flex PETG helps prints withstand the demands of real-world use. Its elasticity and impact absorption make it a durable choice for parts that need more toughness than PLA. In ISO 179-1 unnotched Charpy impact testing, all tested specimens recorded “No Break” in both XY and Z orientations under the test conditions.

PETG-like printing ease, fine details included
G-Flex PETG makes tough, elastic prints accessible to users familiar with PLA and PETG. It retains defined shapes, fine features, and complex geometry, making it well suited for moving joints, intricate models, and snap-fit assemblies.
Recommended settings and common printer presets provide a straightforward starting point. With print speeds up to 300 mm/s and volumetric flow up to 24 mm³/s, it supports efficient printing when speed and flow are configured together.

Safety from printing to handling
G-Flex PETG offers VOC-certified low-emission printing and complies with EN 71-3 (toy safety) for migration of certain elements. Its resistance to brittle breakage helps reduce sharp fragments during handling and support removal.

Bright colors for fun and functional prints
Bring your ideas to life with 6 colors. From expressive models and colorful props to practical everyday parts, the palette gives you more room to create. Compatibility with Bambu AMS, AMS 2 Pro, and Creality CFS, using the recommended settings, supports multicolor projects.

Durchmesser

  • 1.75mm

Gewicht

  • 1kg

Farbe

Produkt ansehen
$21.99