5–10 Tage
Zahlungen
Beschreibung
Beschreibung
Druckdesigner:
Anton
Rexi Labs
Segway Bro
Michael Winston
Szeez
JP-3D-Prints
Mattew Ghost
Epiq3D
Hodzinets
Trent Studio
Druckanforderungen
von LayerHub Jetzt ist er lebendig. Gemeinschaftsgebautes Zuhause für Filamentpräsenzen — Offen für jede Filamentmarke, jede Drucker. Jeder Präset kommt mit einem echten Druckfoto, um es zu beweisen.
Druckeinstellungen
Druckeinstellungen
Polymaker™ PLA Pro
Schlüsselfunktionen
- High-Speed Ausdruck
- hart & nachhaltig
- Sehr stark Schichthaftung
- leicht zu drucken
- Breite Farbwahl
Polymaker™ PLA Pro - Schwarz / 1 kg ist nachbestellt und wird versendet, sobald es wieder auf Lager ist.
Technische Daten
Alles, was Sie brauchen, bevor Sie auf „Drucken“ klicken
Drucktips
- Beginnen Sie innerhalb der empfohlenen Düsen-Temperatur von 210–230 °C und der Druckbett-Temperatur von 30–60 °C und nehmen Sie anschließend kleine Anpassungen für Drucker und Modell vor.
- Verwenden Sie die empfohlene Einstellung für die Kühlung „AN“ und halten Sie die Druckgeschwindigkeit bei maximal 300 mm/s.
- Führen Sie vor einem langen Druck einen kleinen Testdruck durch und nehmen Sie Anpassungen nur innerhalb des veröffentlichten Druckbereichs vor.
- Halten Sie den Filamentpfad frei und stellen Sie vor dem Start eines langen Drucks eine gleichmäßige Spulenzufuhr sicher.
| Eigenschaft | X-Y | Z | Wert | Prüfmethode |
|---|---|---|---|---|
| Dichte | — | — | 1.237 g/cm³ Wichtig | ISO 1183 |
| Zugfestigkeit | 39.93 MPa Wichtig | 25.39 MPa Wichtig | — | ISO 527 |
| Bruchdehnung | 16.57 % Wichtig | 3.05 % Wichtig | — | ISO 527 |
| Biegefestigkeit | 62.12 MPa Wichtig | 49.96 MPa Wichtig | — | ISO 178 |
| Biegemodul | 2438.41 MPa Wichtig | 2368.62 MPa Wichtig | — | ISO 178 |
| Elastizitätsmodul | 2531.08 MPa Wichtig | 2265.58 MPa Wichtig | — | ISO 527 |
| Charpy-Schlagzähigkeit, ungekerbt | 51.7 KJ/m² Wichtig | 21.7 KJ/m² Wichtig | — | ISO 179 |
| Charpy-Schlagzähigkeit, gekerbt | 20.76 KJ/m² Wichtig | — | — | ISO 179 |
| Schmelztemperatur | — | — | 158.9 °C Wichtig | ISO 11357 |
| Glasübergangstemperatur (Tg) | — | — | 58.3 °C Wichtig | ISO 11357 |
| Vicat-Erweichungstemperatur | — | — | 63.5 °C Wichtig | ISO 306 |
| HDT (0.45 MPa) | — | — | 58.1 °C Wichtig | ISO 75 |
| HDT (1.8 MPa) | — | — | 55.6 °C Wichtig | ISO 75 |
Getestet an Prüfkörpern mit 100 % Füllung. X-Y = quer zu den Schichten, Z = zwischen den Schichten (Schichthaftung).
Häufig gestellte Fragen
Fragen? Wir haben die Antworten. Von der Auswahl des richtigen Materials bis zur Pflege deiner Spulen findest du hier alles, was du wissen musst, an einem Ort.
Was ist der Unterschied zwischen PolySonic™ PLA Pro und Polymaker™ PLA Pro?
Werden die Spools in einer AMS arbeiten?
Ist dieses Material Lebensmittel sicher?
Verkaufen Sie Reparaturen?
Ist dieses Material recycelbar?
Brauche ich eine Abdeckung zum Drucken? PLA Der Pro?
Sollte PLA Pro eine gehärtete Düse benötigen?
Ist PLA Pro stärker als regular PLA?
Wie sollte PLA Pro zu speichern?
Mit welchen Supportmaterialien funktioniert PLA Der Pro?
Reviews
High-quality 3D printing filament praised for exceptional print quality and strength. Customers said it "prints flawlessly" with "smooth" results and "fantastic" layer adhesion. Works well at high speeds. Notable for rich colors and consistency. Some concerns about new formula performance and packaging changes (zip bag replaced with heat-sealed bag). One delivery issue reported.
While I'm still all about that PolyLite PLA Pro, I have zero regrets getting this metallic dark blue in the new formula.
Because this is a more aesthetic color, I end up using it for more aesthetic prints and the differences between the old / new formulas don't matter as much. The color has been popular among customers, so it's not one of those spools that's going to sit on a shelf for a long time. It's getting used.
Prints great. Works great in my Qidi Q2
Great saturation and vary smooth print
This filament has been THE backbone of all of my print since I started. Holds in humidity decently, has smooth prints and not many failures, and overall easy to print with! Would recommend.
Somehow having a better experience than my Polymaker ASA. Easier to print, sticks to bed without glue and at a lower temp, similar or higher impact resistance? Besides HDT, what is not to love? Very happy overall with all my Polymaker experiences, seriously.
exactly what I needed, ordered 3 more kgs.
Absolute top tier quality. Downloaded. A profile online and it was flawless from the first print.
So far my printing experience with this new PLA Pro formula has been mixed. I have only had 2 serious jams with my setup, and this product is responsible for 1 of them on the first spool I printed of it. Additionally, the functional specs that matter are almost unanimously worse than the old formula. -1 star for being a jam suspect, -1 star for being less functional than the old formula. 3 stars.
Polymaker PLA Pro black prints smooth and clean! Polymaker has the colors I need in stock, and ships pretty quick and for free.
Perfect Prints, good Layer adhesion
Really smooth printing and very sturdy.
good material
Very smooth prints. Just make sure to run the generic PLA settings on your Bambu printer or you might get jams. Otherwise, the prints are very strong and they look perfect.
Perfect filament for my military prints.
I had a serious stringing problem with another brand. I switched to a Polymaker PLA Pro mid-way during the print and the stringing problem disappeared.
Polymaker does it again. Their products are consistent in quality and have yet to give me issues. Quick shipping and overall great service.
Easy printing. Just the right balance of strength and flexibility when printing mechanical parts. I can't wait until they get this packaged for refills.
Used a free coupon from a raffle and there were no issues. The pla I received prints very well and I love the color.
Shipping was quick and the Polymaker PLA Pro filament printed great and was exactly what I needed as far as strength and print quality is concerned. Will buy again!
Works better than the rest. This might not be the cheapest, but you’re paying for quality. This is probably the best filament on the market.
After drying with Polydryer for just an hour, this filament is doing a great job and print right. Can't find major defect on calibration print. The only defect is the "eco friendly spool" which requires an adapter in order to use in Bambu AMS. Also the filament starts to tangle a bit after a few prints.
Does Polymaker Pro Metallic contain mica or any other metal and does it require a hardened nozzle?
Metallic PLA uses a special glitter powder for the metallic effect, and it contains a very fine powder that is not abrasive.
Hi
I would like to know if I can place orders using HEX or RGB color code? (Custom) or
Do you have a catalog with the colors and codes?
Could I get better price(wholesale) if I’m living in Houston?
Hey!
You can find the closest matches for your HEX or RGB Color Code using our color matching tool: https://app.polymaker.com/
You can then order wholesale here! https://us-wholesale.polymaker.com/
