5-10 days
Payments
Descripción
Descripción
Twice the Essentials, Built for More
Keep your most versatile PETG colors ready for every project with the Polymaker PETG Black and White 4 Pack Bundle. Featuring two spools each of Black and White, this practical four-pack is ideal for functional prints, repeat production, and clean, professional-looking parts.
What’s Included:
- 2x Polymaker™ PETG Black
- 2x Polymaker™ PETG White
Fast, Strong, and Ready to Print
Polymaker™ PETG combines high-speed performance with excellent layer adhesion, durability, and a smooth surface finish. Print at speeds up to 300 mm/s—or over 500 mm/s with high-flow nozzles—while achieving strong, dimensionally stable parts with low warp behavior.
From brackets and fixtures to outdoor tools and cosplay props, this bundle delivers the toughness, flexibility, and chemical resistance needed for demanding everyday applications. Compatible with most FDM printers, it prints smoothly without an enclosure and works seamlessly with AMS and multi-material systems.
Requisitos de impresión
Ajustes de impresión
Ajustes de impresión
Polymaker™ PETG Black and White 4 Pack Bundle
Características del producto
- High-Speed Printing
- Strong & Reliable
- Tough & Chemical Resistant
- Easy to Print
Polymaker™ PETG Black and White 4 Pack Bundle - Filament with spool / 4kg está en pedido pendiente y se enviará tan pronto como vuelva a estar en stock.
Mira lo que está creando la comunidad
Especificaciones técnicas
Todo lo que necesitas antes de imprimir
Printing Tips
- Keep the filament sealed and dry when not in use. For filament that has not been left exposed for a long time, dry it at 60°C for 6 hours. If it has been exposed for an extended period, especially in hot and humid conditions, use a longer drying cycle as needed.
- For build plate adhesion: For best results, use a textured PEI build plate. When printing on smooth PEI or glass, apply a thin layer of glue stick as a release layer to prevent the print from bonding too strongly. If the first layer is not sticking, slightly increase the bed temperature and slow down the first-layer printing speed.
- If stringing occurs: Dry the filament first. If stringing remains, reduce the nozzle temperature within the recommended 240–260°C range, then fine-tune retraction and travel settings.
- If layer adhesion is weak: Reduce cooling within the recommended 20–60% range, slightly increase the nozzle temperature within the recommended range, and reduce printing speed if needed. If using an enclosed printer, closing the enclosure may also help improve layer adhesion.
| Property | X-Y | Z | Value | Method |
|---|---|---|---|---|
| Density | — | — | 1.3 g/cm³ Important | ISO 1183 |
| Tensile strength | 47.96 MPa Important | 45.71 MPa Important | — | ISO 527 |
| Elongation at break | 9.33 % Important | 3.54 % Important | — | ISO 527 |
| Bending strength | 80.08 MPa Important | 57.65 MPa Important | — | ISO 178 |
| Bending modulus | 2277.34 MPa Important | 1958.74 MPa Important | — | ISO 178 |
| Young's modulus | 2311.11 MPa Important | 2202.91 MPa Important | — | ISO 527 |
| Charpy, unnotched | 20.24 KJ/m² Important | 15.74 KJ/m² Important | — | ISO 179 |
| Charpy, notched | 4.95 KJ/m² Important | — | — | ISO 179 |
| Glass transition temperature (Tg) | — | — | 71.24 °C Important | ISO 11357 |
| Vicat softening temperature | — | — | 75 °C Important | ISO 306 |
| HDT (0.45 MPa) | — | — | 69 °C Important | ISO 75 |
| HDT (1.8 MPa) | — | — | 65 °C Important | ISO 75 |
Probado en muestras con un 100 % de relleno. X-Y = transversal a las capas, Z = entre las capas (adhesión entre capas).
Preguntas frecuentes
¿Tienes preguntas? Tenemos las respuestas. Desde elegir el material adecuado hasta cuidar tus bobinas, aquí encontrarás todo lo que necesitas saber en un solo lugar.
