5–10 Tage
Zahlungen
Beschreibung
Beschreibung
Easy to Print. Flexible with a More Refined Finish.
Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.
Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.
True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.
A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.
From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.
Druckanforderungen
LayerHub ist jetzt online. Eine von der Community aufgebaute Plattform für Filamentvoreinstellungen — offen für jede Filamentmarke und jeden Drucker. Jede Voreinstellung enthält als Nachweis ein Foto eines tatsächlich gedruckten Objekts.
Druckeinstellungen
Druckeinstellungen
Polymaker™ TPU95 Matte
Hauptmerkmale
- True 95A Flexibility
- Low-Gloss Matte Finish
- Easy to Print
- Up to 250 mm/s Tested
Entdecken Sie die Projekte der Community
Technische Daten
Alles, was Sie vor dem Drucken wissen müssen
Drucktipps
- Profile: Start with a standard 95A TPU or TPU HF profile. A direct-drive printer is generally easier to set up.
- Build plate and cooling: Set the bed to 35°C and use 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.
- Speed: With a 0.4 mm nozzle, use 50–250 mm/s. The upper end is the maximum tested speed. Adjust for your printer and model.
- Direct-drive retraction: Start with 0.8–1.2 mm at 30 mm/s.
- Drying and storage: Dry at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box while printing and during storage.
| Eigenschaft | X-Y | Z | Wert | Prüfmethode |
|---|---|---|---|---|
| Dichte | — | — | 1.17 g/cm³ Wichtig | ISO 1183 |
| Zugfestigkeit | — | 10.87 MPa Wichtig | — | ISO 527 |
| Bruchdehnung | — | 361 % Wichtig | — | ISO 527 |
| Biegemodul | 69.2 MPa Wichtig | — | — | ISO 178 |
| Schmelztemperatur | — | — | 198.6 °C Wichtig | ISO 11357 |
| Glasübergangstemperatur (Tg) | — | — | -26.6 °C Wichtig | ISO 11357 |
Getestet an Probekörpern mit 100% infill. X-Y = in der Schichtebene, Z = zwischen den Schichten (Schichthaftung).
Häufig gestellte Fragen
Haben Sie Fragen? Wir haben Antworten. Von der Wahl des richtigen Materials bis zur Pflege Ihrer Spulen finden Sie hier alles Wissenswerte an einem Ort.





























