5-10 days
Payments
Beschreibung
Beschreibung
Panchroma™ CoPE: hochwertiger Copolyester für schnelles, müheloses Drucken
Herausragende Oberfläche und Druckbarkeit
Panchroma™ CoPE ist ein Filament auf Copolyester-Basis, das für müheloses Drucken und eine außergewöhnlich glatte, hochwertige Oberfläche entwickelt wurde. Die fortschrittliche Rezeptur verbessert Brücken und Überhänge deutlich und ermöglicht zuverlässiges Drucken mit bis zu 400 mm/s.
Starke Betthaftung, mit wichtigen Hinweisen zur Handhabung
Dieses Material haftet hervorragend auf dem Druckbett und verhindert Verzug selbst bei anspruchsvollen Drucken. Die Haftung kann allerdings so stark sein, dass wir dir ein Trennmittel (etwa Magigoo oder Vision Miner) empfehlen, damit sich die Teile leichter lösen. Verwende texturierte PEI-Druckplatten nicht ohne zusätzliches Trennmittel, die Haftung kann sonst zu stark ausfallen. Am leichtesten lösen sich die Drucke, wenn du sie vor dem Entfernen vollständig auf Raumtemperatur abkühlen lässt.
Besondere Kompatibilität
Panchroma™ CoPE verbindet sich nicht gut mit herkömmlichem PLA und eignet sich daher nicht für Multimaterial-Drucke mit PLA-basierten Panchroma-Effekten. Genau diese geringe Haftung ist aber ein Vorteil, wenn du CoPE als Breakaway-Stützmaterial für PLA einsetzt: Die Stützen lassen sich sauber und einfach entfernen.
Setz auf Panchroma™ CoPE für Projekte, die schnelles, zuverlässiges Drucken, hervorragende Oberflächenqualität und starke Betthaftung erfordern, besonders bei komplexen Geometrien oder Breakaway-Stützen.
Designer der Drucke: Toonz Factory
MyTechFun hat ein großartiges Video zu Panchroma CoPE gemacht – schau es dir an!
Druckanforderungen
Druckeinstellungen
Druckeinstellungen
Panchroma™ CoPE
- High-Speed Printing
- Excellent Surface Finish
- Excellent Bridging & Overhang Performance
- Strong Bed Adhesion
Panchroma™ CoPE - Black / 1 kg ist nachbestellt und wird versendet, sobald es wieder auf Lager ist.
Technische Daten
Alles, was du vor dem Druck wissen musst
- Use standard PLA settings, a 0.4 mm or larger nozzle, and full cooling for the best surface quality.
- Do not combine CoPE with standard PLA in the same part because the materials do not bond reliably.
- Use hairspray, Magigoo Original, or Vision Miner Nano on textured PEI to make removal easier.
- Use glue when needed on PC or textured PEI and allow the plate to cool before removal.
| Property | X-Y | Z | Value | Method |
|---|---|---|---|---|
| Tensile strength | 51.6 MPa Important | 36.1 MPa Important | — | ISO 527 |
| Elongation at break | 10.51 % Important | 2.16 % Important | — | ISO 527 |
| Bending strength | 75 MPa Important | 31 MPa Important | — | ISO 178 |
| Bending modulus | 2370 MPa Important | 1940 MPa Important | — | ISO 178 |
| Young's modulus | 2515 MPa Important | 2190 MPa Important | — | ISO 527 |
| Charpy, notched | 2.89 KJ/m² Important | — | — | ISO 179 |
| Glass transition temperature (Tg) | — | — | 58.17 °C Important | ISO 11357 |
Getestet an Prüfkörpern mit 100 % Infill. X-Y = quer zu den Schichten, Z = zwischen den Schichten (Schichthaftung).
Häufige Fragen
Du hast Fragen? Wir haben die Antworten. Von der Materialwahl bis zur Pflege deiner Spulen - hier findest du alles Wichtige an einem Ort.
What is Panchroma CoPE?
Any tips to help reduce the material from sticking too well to the build plate?
Does this material produce harmful VOCs?
How difficult is CoPE to sand?
Is this material food safe?
Is this material AMS compatible?
Do you sell refills?
Is this material recyclable?
Can I mix and match effects into a single HueForge print?
Customers praised this fast-printing filament for its excellent bed adhesion, vibrant colors, and smooth finish. "Prints as well as or better than PLA" with great layer adhesion. However, some noted it can be brittle and weaker than standard PLA for structural parts. Several mentioned extremely strong bed adhesion requiring glue or non-textured plates for removal.
Prints well, slicer presets are good, accurate colors. Polymaker has been by go to filament company for a while and this filament does not disappoint
I bought this color a while ago and it happens to be the perfect color for my real-life Mecca Chameleon. The price is unbeatable because of the PolyCoins and the filament is very high quality.
Fantastic filament!
love COPE to make my HueForge Art. Works very well for display items.
Worked very well and just as good as PLA. Filament was dry and quality. Price was unbeatable with birthday discount.
Great filament! I love the colors, the strength, and the ease of printing.
Nice and smooth finishes.
The colors are beautiful, the print quality is excellent, especially on overhangs, and bed adhesion is almost too good (use something like Bed Weld as a release agent if you're using a PEI sheet). The only issue I've had has been with layer adhesion - it's good, but prints are not as strong as I get using PLA or PETG. CoPE is great for more decorative models, or for prints that won't be under stress. I also quite like the fact that it doesn't stick to PLA, so I can use it as the support interface material for PLA, and vice versa. This mean I can set the top Z distance to 0 and get as close to a perfect surface on supported areas as possible.
First Polymaker filament purchase. Bright and vibrant colors. The .bbsflmt profile however has a bed temp of 65 degrees C which is higher than recommended. Still printed fine, and I accidentally used my textured PEI plate one time, had no issues removing print but I keep my plates clean.
I odered the CoPe when they first sent out messages about it. I am very glad i watched the videos about because as a 3d printing newbie with an A1 mini, guessing a textured plate, this filament does super ultra stick crazy hard to the plate. I even have some i cant even scrpe off with a knite on my plate. I MUST use glue everytime of else i might rip a part of my project off the plate. One i have a project is finished, its strength and stabily is fairly comparable to other PLA filamens i have used. I do want it to be know you MUST use glue when using this filament l. I will be ordering more as I like the price.
One more thing, i order 4 spools when it came out and at least 3 of them have "jammed" while printing because of it being tangled on the spool, that that has been annoying, but fixable.
Polymaker knocks it out of the park again! I used the same profile as my PLA defaults on a textured PEO plate (not PEI) and achieved speeds up to 250 mm/s. (As far as I can tell, the Sovol SV06 Plus isn't physically capable of much faster than that so I could not test the advertised 400 mm/s.) I look forward to seeing what finishes Polymaker comes out with for this material, it's very easy to work with. Perhaps CoPEterra?
First material I've been able to get working at Ludicrous speeds on the Bambu X1C. Really impressed with the surface quality printing this fast. I couldnt get good adhesion at 30-40c bed temps but 50c seemed to do the trick! No need to use magigoo or anything on my BIQU Glacier plate!
This filament is awesome. Has incredible adhesion capabilities. Make sure you use a smooth plate. No glue is needed.
Very smooth prints.
Adhesion is very good and prints well!
These really do print fast and have great bed adhesive properties. Just don’t attempt multi color prints with anything else other than another roll of CoPE. You can mix with regular PLA if you want to use your Prusa XL to do supports with one type of filament and the main print with another. It makes removing the supports so easy.
Wonderful and reliable filament to work with! Never failed to stick on the bed and always had great layer adhesion. The Grey colour was also nice and shiny too.
This is quite good as long as you choose if for the right items. The main downsides with it is that it breaks easier than pla or petg, but for things that don't need a lot of strength it's a good buy. I buy it for project when I want great colors and don't need very high strength and am trying to save money compared to having to buy a slightly more expensive pla. I even made a small stand completely out of CoPE that is maybe 5 inches tall and roughly 8x8 inches top surface. Had about 2lbs of stuff on it, no sagging or deforming several months later.
I really like the Panchroma CoPE filament. My wife and I manufacture parts for a machine we market and PLA and PETG did not work out for one particular part. CoPE is as easy to print as PLA, but is much tougher for our particular use.
This stuff is wonderful
This is the best filament that I've ever used. It prints easily and prints look fantastic when completed. I highly recommend this filament.
Prints fast with an excellent surface finish. Minimal stringing present but only on internal support, may be down to my tuning. Will continue to print this filament.
As always! I love this filament! They always have the colors i need to make sure my projects look unique and just the way i want them to.
Everything to love about this
