5–10 jours
sécurisés
Description
Description
Exigences d'impression
LayerHub est désormais en ligne. Une plateforme de préréglages de filament créée par la communauté — ouverte à chaque Marque de filament et à toutes les imprimantes. Chaque préréglage est accompagné d’une photo d’un objet réellement imprimé pour en attester.
Paramètres d'impression
Paramètres d'impression
Polymaker™ G-Flex PETG
Caractéristiques principales
- Hard to Break
- Easy Printing
- Fine Detail
- Low-Emission Printing
Découvrez les créations de la communauté
Spécifications techniques
Tout ce qu’il faut savoir avant de lancer l’impression
Conseils d'impression
- Preset: Start with the official G-Flex preset for your printer and slicer. Use a standard 0.4 mm nozzle as the starting point.
- Build plate: Set the bed to 70°C and use a PEI surface without glue. Avoid cold-print plates such as BIQU CryoGrip.
- Speed and flow: Set print speed and volumetric flow together. Use up to 300 mm/s and up to 24 mm³/s.
- Cooling and retraction: Use 0–90% cooling. For direct-drive extruders, start with 1.0 mm retraction at 30 mm/s.
- Drying and storage: Print straight from a freshly opened bag and reseal the spool with desiccant after use. If moisture causes stringing, dry with PolyDryer Level 3 for 24 hours, AMS 2 Pro at 65°C for 24 hours, or an oven at 70°C for at least 6 hours.
| Propriété | X-Y | Z | Valeur | Méthode |
|---|---|---|---|---|
| Densité | — | — | 1.25 g/cm³ Important | ISO 1183 |
| Résistance à la traction | 40.27 MPa Important | 18.49 MPa Important | — | ISO 527 |
| Allongement à la rupture | 306.53 % Important | 104.82 % Important | — | ISO 527 |
| Résistance à la flexion | 13.96 MPa Important | 10.61 MPa Important | — | ISO 178 |
| Module de flexion | 451.55 MPa Important | 350.29 MPa Important | — | ISO 178 |
| Module de Young | 431.49 MPa Important | 330.7 MPa Important | — | ISO 527 |
| Résistance au choc Charpy, non entaillé | No Break Important | No Break Important | — | ISO 179 |
| Température de transition vitreuse (Tg) | — | — | 63.8 °C Important | ISO 11357 |
| Température de ramollissement Vicat | — | — | 89.9 °C Important | ISO 306 |
| HDT (0.45 MPa) | — | — | 61.5 °C Important | ISO 75 |
| HDT (1.8 MPa) | — | — | 46.7 °C Important | ISO 75 |
Essais réalisés sur des éprouvettes avec 100% infill. X-Y = dans le plan des couches, Z = entre les couches (Adhérence inter-couches).
Questions fréquentes
Vous avez des questions ? Nous avons les réponses. Du choix du Matériau adapté à l’entretien de vos bobines, retrouvez ici tout ce qu’il faut savoir.























