💰 INSCRIVEZ-VOUS ET PROFITEZ DE €8 DE RÉDUCTION SUR VOTRE PREMIÈRE COMMANDE

📦 POUR UNE DURÉE LIMITÉE LIVRAISON GRATUITE SUR TOUTES LES COMMANDES

Délai de livraison
5–10 jours
Satisfaction garantie
Retours sous 40 jours
Paiements
sécurisés

Description

Easy to print, hard to break
Polymaker™ G-Flex PETG is a highly durable, elastic PETG that combines PETG’s printing ease and shape retention with TPU’s elasticity and impact absorption. Designed for everyday creations and long-term use, it brings toughness, fine detail, and added flexibility to functional parts, articulated models, props, cosplay accessories, and RC or drone parts.

Impact-tough durability for repeated use
From accidental drops to bending, assembly, and transport, G-Flex PETG helps prints withstand the demands of real-world use. Its elasticity and impact absorption make it a durable choice for parts that need more toughness than PLA. In ISO 179-1 unnotched Charpy impact testing, all tested specimens recorded “No Break” in both XY and Z orientations under the test conditions.

PETG-like printing ease, fine details included
G-Flex PETG makes tough, elastic prints accessible to users familiar with PLA and PETG. It retains defined shapes, fine features, and complex geometry, making it well suited for moving joints, intricate models, and snap-fit assemblies.
Recommended settings and common printer presets provide a straightforward starting point. With print speeds up to 300 mm/s and volumetric flow up to 24 mm³/s, it supports efficient printing when speed and flow are configured together.

Safety from printing to handling
G-Flex PETG offers VOC-certified low-emission printing and complies with EN 71-3 (toy safety) for migration of certain elements. Its resistance to brittle breakage helps reduce sharp fragments during handling and support removal.

Bright colors for fun and functional prints
Bring your ideas to life with 6 colors. From expressive models and colorful props to practical everyday parts, the palette gives you more room to create. Compatibility with Bambu AMS, AMS 2 Pro, and Creality CFS, using the recommended settings, supports multicolor projects.

Printing Requirements

Use an FDM printer capable of a 230–240°C nozzle temperature and a 70°C heated bed. A PEI build surface without glue is recommended. Start with the recommended preset for your printer and adjust settings to suit your setup. Use G-Flex PETG or PLA as support material.Each spool contains 1 kg of 1.75 mm filament, factory-dried and vacuum-sealed for printing straight from the bag. Reseal with desiccant after use. If moisture-related stringing appears, dry at 70°C for at least 6 hours before printing again.


LayerHub is now live. A community-built home for filament presets — open to every filament brand, every printer. Every preset comes with a real print photo to prove it.

Print Settings

  • Printing Temperature: 230°C - 240°C
  • Bed Temperature: 70°C
  • Nozzle Type: Use a standard nozzle. High-flow nozzles are not recommended, as they may reduce interlayer toughness.
  • Build Surface: PEI; no glue required. Do not use cryo/cold-print build plates such as BIQU CryoGrip.
  • Printing Speed: Up to 300 mm/s
  • Maximum Volumetric Flow: Up to 24 mm³/s
  • Fan: 0% - 90%
  • Flow Ratio: 1.00 - 1.02
  • Support Material: G-Flex PETG or PLA
  • Multi-Material System Compatibility: Bambu AMS, AMS 2 Pro, and Creality CFS; use recommended settings.
  • Drying Settings: Oven: 70°C for at least 6 hours.

(Only if the material has absorbed moisture. Factory-dried and vacuum-sealed; ready to print from the bag.)

  • Storage: Reseal with desiccant after use.

Can't find your profiles? Check out our official presets at presets.polymaker.com.

Polymaker™ G-Flex PETG

€21,99
1.75mm UGS : PM1022060 Code HEX : #070808
<p>Gagnez%20[points_amount]%20lorsque%20vous%20achetez%20cet%20article.</p>

Key Features

  • Hard to Break
  • Easy Printing
  • Fine Detail
  • Low-Emission Printing
Diamètre
Poids
Couleur: Noir

Moyens de paiement

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Easy to Print, Hard to Break

Polymaker™ G-Flex PETG is an elastic PETG filament that combines easy printing and fine detail with the toughness to handle drops, bends, and repeated use.

Prints Like PETG, Absorbs Impact Like TPU

Combining the printing ease and shape retention of PETG with the impact absorption of TPU, G-Flex PETG has more give than standard PETG while holding its shape better than soft TPU, making it a good fit for detailed parts that need to flex.

Built to Take a Hit

G-Flex PETG flexes to absorb impact, helping printed parts hold up to accidental drops and everyday knocks.

Intricate Prints, Exceptional Detail

From thin limbs on articulated figures to intricate surface textures, G-Flex PETG preserves the details that bring a design to life.

Safety from Printing to Handling

G-Flex PETG is certified for low VOC emissions under tested printing conditions and meets EN 71-3 requirements for the migration of certain elements.

Built for Repeated Flexing

Print snap-fit joints, clips, and flexible parts that bend during assembly and hold their shape in use. G-Flex PETG gives moving parts the flexibility they need for repeated assembly, adjustment, and handling.

Made for the Things You Use

Print protective RC parts for off-road runs, articulated figures for repeated handling, and cosplay accessories that flex as you move.

Available in Six Colors

Choose from bold shades and versatile neutrals. More colors are coming soon!

See What The Community is Making

Printing Tips

  • Preset: Start with the official G-Flex preset for your printer and slicer. Use a standard 0.4 mm nozzle as the starting point.
  • Build plate: Set the bed to 70°C and use a PEI surface without glue. Avoid cold-print plates such as BIQU CryoGrip.
  • Speed and flow: Set print speed and volumetric flow together. Use up to 300 mm/s and up to 24 mm³/s.
  • Cooling and retraction: Use 0–90% cooling. For direct-drive extruders, start with 1.0 mm retraction at 30 mm/s.
  • Drying and storage: Print straight from a freshly opened bag and reseal the spool with desiccant after use. If moisture causes stringing, dry with PolyDryer Level 3 for 24 hours, AMS 2 Pro at 65°C for 24 hours, or an oven at 70°C for at least 6 hours.
Propriété X-Y Z Valeur Méthode
Densitég/cm³·ISO 1183 — — 1.25 g/cm³ Important ISO 1183
Résistance à la tractionMPa·ISO 527 40.27 MPa Important 18.49 MPa Important — ISO 527
Allongement à la rupture%·ISO 527 306.53 % Important 104.82 % Important — ISO 527
Résistance à la flexionMPa·ISO 178 13.96 MPa Important 10.61 MPa Important — ISO 178
Module de flexionMPa·ISO 178 451.55 MPa Important 350.29 MPa Important — ISO 178
Module de YoungMPa·ISO 527 431.49 MPa Important 330.7 MPa Important — ISO 527
Résistance au choc Charpy, non entailléISO 179 No Break Important No Break Important — ISO 179
Température de transition vitreuse (Tg)°C·ISO 11357 — — 63.8 °C Important ISO 11357
Température de ramollissement Vicat°C·ISO 306 — — 89.9 °C Important ISO 306
HDT (0.45 MPa)°C·ISO 75 — — 61.5 °C Important ISO 75
HDT (1.8 MPa)°C·ISO 75 — — 46.7 °C Important ISO 75

Tested on 100% infill specimens. X-Y = across the layers, Z = between the layers (layer adhesion).

Frequently Asked Questions

Got questions? We've got answers. From choosing the right material to caring for your spools, here's everything you need to know in one spot.

Qu’est-ce que le G-Flex PETG ?

It is an elastic, impact-tough PETG that still prints as easily as standard PETG. It flexes and absorbs impact instead of snapping, so parts withstand drops, bending and everyday handling.

Pourquoi est-il difficile à casser ?

Elasticity and impact absorption improve the durability of printed parts. All tested specimens recorded No Break in XY and Z unnotched Charpy impact testing under ISO 179-1. How a finished part holds up still depends on its design, wall thickness, print orientation and settings.

How does it differ from standard PETG and soft TPU?

It adds elasticity and impact absorption to PETG-like printing ease and shape retention. Compared with soft TPU, it retains defined structures and fine detail for complex, articulated objects that need to hold their shape.

Avec quel profil d’impression commencer ?

Use the G-Flex preset for your printer on presets.polymaker.com. If there is none yet, start from Bambu PLA Silk (Bambu Lab), Elegoo PLA Silk (Elegoo), Generic PLA (Creality and Snapmaker), Generic PLA Silk (Prusa) or Anycubic PLA-CF (Anycubic).

What nozzle, bed and speed settings should I use?

Use a 230–240°C nozzle, a 70°C bed and a PEI surface without glue. Do not use cryo (cold-print) build plates, such as BIQU CryoGrip. Print speed is up to 300 mm/s and volumetric flow up to 24 mm³/s. Set speed and flow together.

Does it need drying before printing?

Not at first. Every spool is dried and vacuum-sealed at the factory, so you can print straight from the bag. Reseal it with the desiccant after use. If you see stringing, dry it: PolyDryer Level 3 for 24 hours, AMS 2 Pro at 65°C for 24 hours, or an oven at 70°C for at least 6 hours.

Comment le conserver après utilisation ?

Reseal the spool with desiccant to reduce moisture absorption. If moisture-related stringing appears when printing again, dry the material before continuing.

Puis-je utiliser un système multicolore ?

Yes. It is compatible with multicolour systems such as Bambu AMS, AMS 2 Pro and Creality CFS.

Reviews

Polymaker

Polymaker™ G-Flex PETG

€21,99 EUR
Easy to print, hard to break
Polymaker™ G-Flex PETG is a highly durable, elastic PETG that combines PETG’s printing ease and shape retention with TPU’s elasticity and impact absorption. Designed for everyday creations and long-term use, it brings toughness, fine detail, and added flexibility to functional parts, articulated models, props, cosplay accessories, and RC or drone parts.

Impact-tough durability for repeated use
From accidental drops to bending, assembly, and transport, G-Flex PETG helps prints withstand the demands of real-world use. Its elasticity and impact absorption make it a durable choice for parts that need more toughness than PLA. In ISO 179-1 unnotched Charpy impact testing, all tested specimens recorded “No Break” in both XY and Z orientations under the test conditions.

PETG-like printing ease, fine details included
G-Flex PETG makes tough, elastic prints accessible to users familiar with PLA and PETG. It retains defined shapes, fine features, and complex geometry, making it well suited for moving joints, intricate models, and snap-fit assemblies.
Recommended settings and common printer presets provide a straightforward starting point. With print speeds up to 300 mm/s and volumetric flow up to 24 mm³/s, it supports efficient printing when speed and flow are configured together.

Safety from printing to handling
G-Flex PETG offers VOC-certified low-emission printing and complies with EN 71-3 (toy safety) for migration of certain elements. Its resistance to brittle breakage helps reduce sharp fragments during handling and support removal.

Bright colors for fun and functional prints
Bring your ideas to life with 6 colors. From expressive models and colorful props to practical everyday parts, the palette gives you more room to create. Compatibility with Bambu AMS, AMS 2 Pro, and Creality CFS, using the recommended settings, supports multicolor projects.

Diamètre

  • 1.75mm

Poids

  • 1kg

Couleur

Voir le produit
€21,99