5–10 jours
sécurisés
Description
Description
Easy to Print. Flexible with a More Refined Finish.
Polymaker™ TPU95 Matte brings together three essentials for flexible 3D printing: approachable printing, true 95A flexibility, and a refined matte finish. Designed for functional parts and creative projects alike, it combines flexibility with shape recovery and structural stability, while its low-gloss surface gives finished prints a more polished, less plasticky appearance. With 15 colors spanning classic shades and soft pastels, TPU95 Matte offers more ways to make practical parts distinctive.
Less Tuning. More Finished Parts.
Getting started is straightforward: use a standard 95A TPU or TPU HF profile as your starting point. Mainstream direct-drive printers are easier to set up for this material, and the maximum tested print speed reaches 250 mm/s under specified printer, model, and test conditions. When the filament is kept dry, it can print with no obvious stringing and deliver strong finished-print quality. Actual results depend on the printer, settings, filament condition, and model geometry.
True 95A Flexibility, Built for Everyday Parts
TPU95 Matte balances bending, shape recovery, and structural stability. It’s made for parts that need to flex while retaining their shape, including phone cases, protective covers, soft clamp jaws, tool grips, and equipment-protection parts. Its 95A hardness also makes it suitable for functional prototypes and small-batch parts where dependable flexibility matters.
A Genuine Matte Finish in More Colors
The fine, low-gloss surface reduces the shine often associated with flexible prints, helping them look more like finished consumer products. The matte appearance remains consistent across lower and higher print speeds. A 15-color range—including classic colors and lower-saturation pastels—supports functional identification, product design, and personal expression.
From Equipment Protection to Everyday Creation
Use TPU95 Matte for drone protection, vibration-damping feet, fashion accessories, tool grips, and other flexible parts for everyday customization. For best results, keep the filament dry and treat the suggested default profile as a starting point; fine-tune settings for your printer and model.
Exigences d'impression
LayerHub est désormais en ligne. Une plateforme de préréglages de filament créée par la communauté — ouverte à chaque Marque de filament et à toutes les imprimantes. Chaque préréglage est accompagné d’une photo d’un objet réellement imprimé pour en attester.
Paramètres d'impression
Paramètres d'impression
Polymaker™ TPU95 Matte
Caractéristiques principales
- True 95A Flexibility
- Low-Gloss Matte Finish
- Easy to Print
- Up to 250 mm/s Tested
Découvrez les créations de la communauté
Spécifications techniques
Tout ce qu’il faut savoir avant de lancer l’impression
Conseils d'impression
- Profile: Start with a standard 95A TPU or TPU HF profile. A direct-drive printer is generally easier to set up.
- Build plate and cooling: Set the bed to 35°C and use 100% part cooling. The recommended setup requires no build surface treatment or heated chamber.
- Speed: With a 0.4 mm nozzle, use 50–250 mm/s. The upper end is the maximum tested speed. Adjust for your printer and model.
- Direct-drive retraction: Start with 0.8–1.2 mm at 30 mm/s.
- Drying and storage: Dry at 70°C for 6 hours when needed. Use a PolyBox™ or PolyDryer™ Box while printing and during storage.
| Propriété | X-Y | Z | Valeur | Méthode |
|---|---|---|---|---|
| Densité | — | — | 1.17 g/cm³ Important | ISO 1183 |
| Résistance à la traction | — | 10.87 MPa Important | — | ISO 527 |
| Allongement à la rupture | — | 361 % Important | — | ISO 527 |
| Module de flexion | 69.2 MPa Important | — | — | ISO 178 |
| Température de fusion | — | — | 198.6 °C Important | ISO 11357 |
| Température de transition vitreuse (Tg) | — | — | -26.6 °C Important | ISO 11357 |
Essais réalisés sur des éprouvettes avec 100% infill. X-Y = dans le plan des couches, Z = entre les couches (Adhérence inter-couches).
Questions fréquentes
Vous avez des questions ? Nous avons les réponses. Du choix du Matériau adapté à l’entretien de vos bobines, retrouvez ici tout ce qu’il faut savoir.





























