💰 INSCRIVEZ-VOUS ET PROFITEZ DE €8 DE RÉDUCTION SUR VOTRE PREMIÈRE COMMANDE

📦 POUR UNE DURÉE LIMITÉE LIVRAISON GRATUITE SUR TOUTES LES COMMANDES

Achetez plus, économisez plus !

Économisez jusqu’à 50% + un cadeau surprise gratuit pour les commandes éligibles.

Acheter maintenant

Collection TPU flexible


  • Nouvelle arrivée

    Polymaker™ TPU95 Matte

  • PolyFlex™ TPU95

  • PolyFlex™ TPU90

  • PolyFlex™ TPU95-HF

TPU Il y a une gamme de flexibilité

Soft et Impact Resistant

Que vous souhaitiez une coque de téléphone ultra-souple ou que vous vouliez ajouter une résistance aux chocs à votre impression en plastique rigide, le TPU répond à vos besoins.

FlexibleSoft TouchRésistance aux chocs

FAQ sur TPU flexible

Qu’est-ce que le filament TPU ?

TPU filament is a flexible, rubber-like material used in FDM/FFF 3D printing. TPU stands for thermoplastic polyurethane, a polymer that softens when heated and becomes solid again as it cools. Compared with rigid 3D printing filaments, thermoplastic polyurethane filament offers greater elasticity, impact resistance, and abrasion resistance.

À quoi sert le filament TPU ?

TPU material is used for parts that need to bend, stretch, absorb impact, or resist wear. Common applications include phone cases, protective covers, seals, gaskets, grips, flexible connectors, vibration-damping feet, wheels, and wearable components.The flexibility of a printed part also depends on its wall thickness, infill, geometry, and Shore hardness. A part made from flexible 3D printer filament can therefore feel firm or soft even when printed from the same spool.

Quelle est la différence entre le filament TPU et le filament PLA ?

TPU is flexible and resilient, while PLA is comparatively rigid and easier to print. TPU 3D printer filament is generally better for parts that must bend, absorb impact, or resist abrasion. PLA filament is usually more suitable for rigid prototypes, decorative models, and parts requiring sharper details.TPU also requires more careful filament feeding, moisture control, speed, and retraction settings than PLA.

Comment choisir entre PolyFlex TPU90, TPU95 et TPU95-HF ?

Choose according to the required flexibility, printer configuration, and printing speed:

  • PolyFlex TPU90 has a shore hardness of 90A and is the softest option. It is suitable for softer seals, cushions, grips, and flexible components, but requires a well-constrained direct-drive extruder.
  • PolyFlex TPU95 has a shore hardness of 95A and balances flexibility with easier handling. It is a general-purpose choice for protective covers, flexible connectors, and wear-resistant functional parts.
  • PolyFlex TPU95-HF is a high-flow TPU filament designed for faster printing. It is better suited to production and rapid prototyping when throughput is more important than maximum softness.

Shore hardness is only one factor. Increasing wall thickness, top and bottom layers, or infill can make the finished part feel substantially firmer.

Toutes les imprimantes 3D peuvent-elles imprimer du filament TPU ?

No. A printer must support the filament diameter and required nozzle temperature, and its extrusion system must be able to feed flexible material without buckling.PolyFlex TPU90 requires a direct-drive extruder with a short, constrained filament path. Direct drive is also strongly recommended for PolyFlex TPU95. PolyFlex TPU95-HF can be used with an indirect or Bowden-style system, but lower speeds may be necessary. A standard brass nozzle is suitable because these unfilled TPU products do not contain abrasive carbon or glass fibers.

Quels Paramètres d'impression dois-je utiliser pour le filament Polymaker TPU ?

Polymaker’s downloadable TDS documents provide the following starting ranges, based on a 0.4 mm nozzle:

  • PolyFlex TPU90: 210–230°C nozzle, 25–60°C bed, and 30–70 mm/s
  • PolyFlex TPU95: 210–230°C nozzle, 25–60°C bed, and 30–50 mm/s
  • PolyFlex TPU95-HF: 200–230°C nozzle, 25–50°C bed, and 30–100 mm/s

The cooling fan should be on, and an enclosure is not required. For retraction, the TDS documents list a distance of 3–6 mm and a speed of 40–60 mm/s; start with the printer profile recommended for the specific product and adjust gradually. Successful TPU 3D printing also depends on the extruder design, nozzle diameter, model geometry, and desired surface quality.

Le filament TPU doit-il être séché avant l’impression ?

TPU filament should be dried when it has absorbed moisture. Wet TPU can produce popping sounds, bubbles, excessive stringing, uneven extrusion, and a rough surface.The current Polymaker TDS documents specify drying PolyFlex TPU90, TPU95, and TPU95-HF at 70°C for eight hours. After drying, store the spool in a sealed container or dry box with desiccant to limit further moisture absorption.

Le filament TPU nécessite-t-il une Imprimante 3D fermée ?

No. PolyFlex TPU90, TPU95, and TPU95-HF do not require an enclosed printer. These flexible filament products can be printed at normal room temperature with the recommended nozzle, bed, cooling, and extrusion settings. A stable environment without strong drafts is sufficient.

Le filament TPU peut-il être utilisé avec un système AMS ou MMU ?

Standard flexible TPU is generally not suitable for an AMS or MMU unless the system manufacturer explicitly approves the exact filament. These systems repeatedly push, retract, load, and unload filament through a long path, where soft TPU material can compress, buckle, or become stuck.PolyFlex TPU90, TPU95, and TPU95-HF should normally be fed directly to the printer rather than through an automated material system. “High flow” describes how TPU95-HF melts and extrudes; it does not mean the filament is automatically AMS-compatible. Some systems support specially formulated, much firmer TPU, so always follow the equipment manufacturer’s compatibility list.

Comment éviter les fils parasites et les problèmes d’alimentation lors de l’impression de TPU ?

When 3D printing TPU, dry the filament first because absorbed moisture is a major cause of stringing, bubbles, and unstable extrusion. Use a short, well-constrained filament path, keep the spool moving freely, and reduce the printing speed if the filament buckles or under-extrudes.If stringing remains, adjust the nozzle temperature and retraction settings within the product’s recommended ranges, increase non-print travel speed where appropriate, and reduce unnecessary travel moves. Softer flexible filament generally requires more careful feeding and tuning than firmer TPU grades.