5–10 jours
sécurisés
Description
Description
Exigences d'impression
LayerHub est désormais en ligne. Une plateforme de préréglages de filament créée par la communauté — ouverte à chaque Marque de filament et à toutes les imprimantes. Chaque préréglage est accompagné d’une photo d’un objet réellement imprimé pour en attester.
Paramètres d'impression
Paramètres d'impression
Polymaker™ PETG Translucent
Caractéristiques principales
- Translucent at 200 mm/s
- Made for LED Lighting Projects
- Heat Deflection at 74.3°C
- Rich Color Options
Découvrez les créations de la communauté
Spécifications techniques
Tout ce qu’il faut savoir avant de lancer l’impression
Conseils d'impression
- Preset and speed: Start with the official PETG Translucent profile for your printer. If it is unavailable, start with a PETG profile. Use 200 mm/s as a starting point with a 0.4 mm nozzle.
- Build plate: Keep textured PEI clean and set the bed to 60°C. Set a smooth build plate to 70°C. Use glue when printing on smooth PEI.
- Cooling and retraction: For normal printing, use 20% fan at a 30-second layer time and 50% at an 8-second layer time. Use your slicer’s default retraction distance and speed for direct drive.
- Drying: If the filament has absorbed moisture, dry it at 60–70°C for 4–6 hours.
- Clarity: Tune wall thickness, geometry and layer height for the balance of clarity and light diffusion your design needs.
| Propriété | X-Y | Z | Valeur | Méthode |
|---|---|---|---|---|
| Densité | — | — | 1.3 g/cm³ Important | ISO 1183 |
| Résistance à la traction | 46 MPa Important | 30.99 MPa Important | — | ISO 527 |
| Allongement à la rupture | 8.17 % Important | 3.16 % Important | — | ISO 527 |
| Résistance à la flexion | 72.07 MPa Important | 61.24 MPa Important | — | ISO 178 |
| Module de flexion | 2.26 GPa Important | 1.88 GPa Important | — | ISO 178 |
| Module de Young | 2.13 GPa Important | 1.88 GPa Important | — | ISO 527 |
| Résistance au choc Charpy, non entaillé | — | 5.51 kJ/m² Important | — | ISO 179 |
| Résistance au choc Charpy, entaillé | 2.91 kJ/m² Important | — | — | ISO 179 |
| Température de transition vitreuse (Tg) | — | — | 79.2 °C Important | ISO 11357 |
| Température de ramollissement Vicat | — | — | 83.2 °C Important | ISO 306 |
| HDT (0.45 MPa) | — | — | 77.1 °C Important | ISO 75 |
| HDT (1.8 MPa) | — | — | 74.3 °C Important | ISO 75 |
Essais réalisés sur des éprouvettes avec 100% infill. X-Y = dans le plan des couches, Z = entre les couches (Adhérence inter-couches).
Questions fréquentes
Vous avez des questions ? Nous avons les réponses. Du choix du Matériau adapté à l’entretien de vos bobines, retrouvez ici tout ce qu’il faut savoir.



























