5-10 days
Payments
Description
Description
Panchroma™ CoPE: High-Speed, High-Quality Copolyester for Effortless Printing
Exceptional Surface Finish and Printability
Panchroma™ CoPE is a copolyester-based filament engineered for effortless printing and an exceptionally smooth, high-quality surface finish. Its advanced formulation significantly improves bridging and overhang capabilities, enabling reliable, high-speed printing up to 400 mm/s.
Superior Bed Adhesion With Important Handling Tips
This material offers outstanding bed adhesion, helping to prevent warping even on challenging prints. However, the adhesion can be so strong that a release agent (such as Magigoo or Vision Miner) is recommended for easier part removal. Avoid using textured PEI build plates without an added adhesive, as adhesion may be excessive. For the easiest release, allow prints to fully cool to room temperature before removal.
Specialized Compatibility
Panchroma™ CoPE does not bond well with standard PLA, making it unsuitable for multi-material prints combining PLA-based Panchroma effects. However, this low adhesion is an advantage when using CoPE as a breakaway support material for PLA, allowing for clean and easy support removal.
Choose Panchroma™ CoPE for projects demanding fast, reliable printing, excellent surface quality, and robust bed adhesion - especially when printing complex geometries or using breakaway supports.
Prints Designer: Toonz Factory
MyTechFun’s got a great video on Panchroma CoPE! Check it out!
Printing Requirements
Print Settings
Print Settings
Panchroma™ CoPE
- High-Speed Printing
- Excellent Surface Finish
- Excellent Bridging & Overhang Performance
- Strong Bed Adhesion
Panchroma™ CoPE - Black / 1.75mm / 1kg is backordered and will ship as soon as it is back in stock.
Technical Specifications
Everything you need before you hit print
- Use standard PLA settings, a 0.4 mm or larger nozzle, and full cooling for the best surface quality.
- Do not combine CoPE with standard PLA in the same part because the materials do not bond reliably.
- Use hairspray, Magigoo Original, or Vision Miner Nano on textured PEI to make removal easier.
- Use glue when needed on PC or textured PEI and allow the plate to cool before removal.
| Property | X-Y | Z | Value | Method |
|---|---|---|---|---|
| Tensile strength | 51.6 MPa Important | 36.1 MPa Important | — | ISO 527 |
| Elongation at break | 10.51 % Important | 2.16 % Important | — | ISO 527 |
| Bending strength | 75 MPa Important | 31 MPa Important | — | ISO 178 |
| Bending modulus | 2370 MPa Important | 1940 MPa Important | — | ISO 178 |
| Young's modulus | 2515 MPa Important | 2190 MPa Important | — | ISO 527 |
| Charpy, notched | 2.89 KJ/m² Important | — | — | ISO 179 |
| Glass transition temperature (Tg) | — | — | 58.17 °C Important | ISO 11357 |
Tested on 100% infill specimens. X-Y = across the layers, Z = between the layers (layer adhesion).
Frequently Asked Questions
Got questions? We've got answers. From choosing the right material to caring for your spools, here's everything you need to know in one spot.
What is Panchroma CoPE?
Any tips to help reduce the material from sticking too well to the build plate?
Does this material produce harmful VOCs?
How difficult is CoPE to sand?
Is this material food safe?
Is this material AMS compatible?
Do you sell refills?
Is this material recyclable?
Can I mix and match effects into a single HueForge print?
Customers praised this filament for fast printing speeds and vibrant colors. "Prints as well or better than anything else I've used," said shoppers. Many noted excellent bed adhesion and smooth finishes. However, some found it brittle and weaker than PLA for structural parts. Several mentioned it sticks very strongly to textured PEI plates, requiring glue or smooth plates for removal.
Prints well, slicer presets are good, accurate colors. Polymaker has been by go to filament company for a while and this filament does not disappoint
I bought this color a while ago and it happens to be the perfect color for my real-life Mecca Chameleon. The price is unbeatable because of the PolyCoins and the filament is very high quality.
Fantastic filament!
love COPE to make my HueForge Art. Works very well for display items.
Worked very well and just as good as PLA. Filament was dry and quality. Price was unbeatable with birthday discount.
Great filament! I love the colors, the strength, and the ease of printing.
Nice and smooth finishes.
The colors are beautiful, the print quality is excellent, especially on overhangs, and bed adhesion is almost too good (use something like Bed Weld as a release agent if you're using a PEI sheet). The only issue I've had has been with layer adhesion - it's good, but prints are not as strong as I get using PLA or PETG. CoPE is great for more decorative models, or for prints that won't be under stress. I also quite like the fact that it doesn't stick to PLA, so I can use it as the support interface material for PLA, and vice versa. This mean I can set the top Z distance to 0 and get as close to a perfect surface on supported areas as possible.
First Polymaker filament purchase. Bright and vibrant colors. The .bbsflmt profile however has a bed temp of 65 degrees C which is higher than recommended. Still printed fine, and I accidentally used my textured PEI plate one time, had no issues removing print but I keep my plates clean.
I odered the CoPe when they first sent out messages about it. I am very glad i watched the videos about because as a 3d printing newbie with an A1 mini, guessing a textured plate, this filament does super ultra stick crazy hard to the plate. I even have some i cant even scrpe off with a knite on my plate. I MUST use glue everytime of else i might rip a part of my project off the plate. One i have a project is finished, its strength and stabily is fairly comparable to other PLA filamens i have used. I do want it to be know you MUST use glue when using this filament l. I will be ordering more as I like the price.
One more thing, i order 4 spools when it came out and at least 3 of them have "jammed" while printing because of it being tangled on the spool, that that has been annoying, but fixable.
Polymaker knocks it out of the park again! I used the same profile as my PLA defaults on a textured PEO plate (not PEI) and achieved speeds up to 250 mm/s. (As far as I can tell, the Sovol SV06 Plus isn't physically capable of much faster than that so I could not test the advertised 400 mm/s.) I look forward to seeing what finishes Polymaker comes out with for this material, it's very easy to work with. Perhaps CoPEterra?
First material I've been able to get working at Ludicrous speeds on the Bambu X1C. Really impressed with the surface quality printing this fast. I couldnt get good adhesion at 30-40c bed temps but 50c seemed to do the trick! No need to use magigoo or anything on my BIQU Glacier plate!
This filament is awesome. Has incredible adhesion capabilities. Make sure you use a smooth plate. No glue is needed.
Adhesion is very good and prints well!
These really do print fast and have great bed adhesive properties. Just don’t attempt multi color prints with anything else other than another roll of CoPE. You can mix with regular PLA if you want to use your Prusa XL to do supports with one type of filament and the main print with another. It makes removing the supports so easy.
Wonderful and reliable filament to work with! Never failed to stick on the bed and always had great layer adhesion. The Grey colour was also nice and shiny too.
This is quite good as long as you choose if for the right items. The main downsides with it is that it breaks easier than pla or petg, but for things that don't need a lot of strength it's a good buy. I buy it for project when I want great colors and don't need very high strength and am trying to save money compared to having to buy a slightly more expensive pla. I even made a small stand completely out of CoPE that is maybe 5 inches tall and roughly 8x8 inches top surface. Had about 2lbs of stuff on it, no sagging or deforming several months later.
I really like the Panchroma CoPE filament. My wife and I manufacture parts for a machine we market and PLA and PETG did not work out for one particular part. CoPE is as easy to print as PLA, but is much tougher for our particular use.
This stuff is wonderful
This is the best filament that I've ever used. It prints easily and prints look fantastic when completed. I highly recommend this filament.
Prints fast with an excellent surface finish. Minimal stringing present but only on internal support, may be down to my tuning. Will continue to print this filament.
As always! I love this filament! They always have the colors i need to make sure my projects look unique and just the way i want them to.
Everything to love about this
Love this filament especially on such an amazing sale. Also shipped incredibly fast. Thank you!
